Kenmore Range/Stove/Oven Model 99241 (1988) Parts
Featured parts for Kenmore Range/Stove/Oven
Light bulb 40watt 120volt meduim standard base. Used in many refrigerators and ranges.
Oven bake heating element with screw-on terminals. The element is 18-1/4 inches wide, 14-1/2 inches deep to mounting flange. Terminal ends extend 2-1/2 inches past flange. 2,300 watts at 220 volts. If the oven does not heat the bake element may have burned out.
Chrome trim ring for 6-inch flip up burner. 6" bowl, 8" matching burner and bowl can be found in the related parts below.
Stove top surface element control switch kit. If the surface element is not heating the element can be tested to determine if it is defective. If not, the switch is likely causing the problem.
Stove top coil heating element. The element is 8" in diameter. If the surface element won't heat, either the surface element or the surface element switch may be defective. To determine if the surface element is defective, use a multimeter to test it for continuity.
Stove top coil heating element. The element is 6" in diameter. If the surface element won't heat, either the surface element or the surface element switch may be defective. To determine if the surface element is defective, use a multimeter to test it for continuity.
Receptable kit (terminal block) for top surface element on electric range. If the heating element works intermittently, this receptacle may be corroded, or the surface element's terminals may be corroded.
Start doing it yourself with the confidence that comes with 100+ years of experience. We've got millions of parts, hundreds of brands, and thousands of step-by-step videos— everything you need to find it, fix it and finish the job right.
