Washer drive motor coupler. New style with metal sleeves for added strength. This version replaces all previous motor coupler styles and versions. For direct drive washing machines. Common symptom of failed coupler is washer will fill, not agitate or spin but will drain the water from the tub.
Washing machine drain pump. The pump mounts directly to the motor with two clips. If the washer does not drain then the pump could be locked up or a small object may be clogging it. A small leak in front of the washer could be caused by a defective pump.
Washing machine clutch assembly with hardware. *Blue spring for regular, large, extra and super capacity washers, black for compact models. A worn clutch often causes a slower spin speed which leaves the clothes soaked after the cycle.
Transmission (gearbox) for direct-drive washing machines. If the gears inside the transmission are worn out, the washer may not spin.
Centerpost bearing and seal kit for direct drive washer. The brake removal tool is needed for easy removal of your original bearing. Please see related items below.
Spin tube bearing
Center post bearing, upper. Special bearing tool for install no longer available from the manufacturer.
Thrust ring, spin tube
Water inlet valve kit - 220/240V 50/60Hz *For export models
Agitator ball bearing kit inside gearcase
Gearcase housing kit with main drive gear