Refrigerator icemaker assembly, modular style. The new icemaker does not include a new cover, ice level arm, or wire harness, these components will need to be reused from original icemaker.
Refrigerator icemaker control module and motor assembly. Located under the white cover of icemaker and controls ice ejector bar, heater and water inlet valve for the icemaker. If the icemaker is not making ice or making too much ice the model may be defective.
All-purpose silicon grease, ½ oz. Not food grade.
Screw 8 X 1/2
Ice maker module front cover
Bearing and cup assembly for icemaker
Refrigerator water inlet valve kit. The new part may appear different from the original. It features a new quick connect tube fitting. Cut retaining nut off of existing plastic water line and gently push it into the new valve. To remove, depress the ring that the tube slides into.
Thermostat for modular icemaker, with new clips
Nut, 1/4" plastic water line
Gasket, water inlet hose
Ice stripper for icemaker
Ejector arm for icemaker