Washing machine agitator repair kit. Includes agitator cam and 4 directional cogs (also called dog ears). If the upper section of the agitator isn't turning properly, then the agitator cam and dog ears are likely worn-out and require replacement.
Spray paint, white, 12 ounces
Agitator inner cap and seal. Helps keep water, fabric softener from going thru the agitator. Fabric softner dispenses from the holes in the agitator, just above the cap.
Package of two 5-foot-long Industrial Braid hoses with pre-installed washers and straight ends. It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.
Hose from tub to pump, with clamps
Drain hose assembly, washing machine
Fabric softener dispenser
Screw, 10-24 3/8
Washing machine drive motor, 2 speed. If your drive motor is defective, the washer won't spin, agitate, or drain.
Spring, clip knob
Bleach dispenser cup. Helps to funnel bleach to the bottom of the tub to mix with the water. White
Suspension spring retainer
Nut, right-hand thread, holds inner tub in place
Washing machine suspension pad kit. These pads help to absorb the movement of the washer tub. If a tub pad is worn, the washing machine will be unbalanced and will vibrate or shake during the spin cycle.
Washing machine transmission stem seal