Refrigerator icemaker. This item does not include a new shut off arm. To remove the existing shut off arm from the old icemaker, lift it to the up position, unhook it from the fill cup bearing, and pull it out of the module.
White touch-up paint. .6 oz.
2 Terminal door switch
Compressor run capacitor
Refrigerator crisper pan
Refrigerator shelf retainer bar end cap, thin bar
Spray paint, white, 12 ounces
Black appliance touch-up paint.
Refrigerator icemaker water inlet valve. If the icemaker is making small or hollow cubes then the water inlet valve may be restricted and require replacement.
Refrigerator icemaker control module and motor assembly. Located under the white cover of icemaker and controls ice ejector bar, heater and water inlet valve for the icemaker. If the icemaker is not making ice or making too much ice the model may be defective.
Refrigerator door gasket. Color: mist beige. If this gasket is worn out, cold air will leak out of the refrigerator. As a result, the fridge may run longer in an attempt to cool down., or frost may accumulate inside of the refrigerator
Refrigerator evaporator fan motor. The evaporator fan motor draws air over the evaporator (cooling) coils and circulates the cold air through the refrigerator and freezer compartments.
Roller for base
Door shelf bar
Door stop bracket