Maytag Washer/Dryer Combo Model LSE1000 Parts
Featured parts for Maytag Washer/Dryer Combo
Dryer gas burner valve solenoid set. If the dryer does not heat or heats intermittently the coils could be defective. To test, watch the burner and if the igniter glows for a while and then shuts off without the gas igniting, it usually means one of these coils is bad.
Dryer blower wheel for exhaust with clamp. If the dryer does not heat properly then this wheel may be stripped causing an air flow problem.
Dryer slide in lint filter (lint trap). Proper air flow is critical to dryer operation so the filter should be cleaned before every load. Replace the filter if it has any tears or rips in it.
Dryer high-limit thermostat, L220-40F. If the dryer overheats, this high-limit thermostat will cut off the power to the heating element. If the high-limit thermostat has blown, the dryer won't heat.
High-limit thermostat L200-30
Static electricity spark gap assembly for dryer drum
High limit thermostat (some Canadian models only)
Heating coil
Heating element kit - 208 Volt
Cycling thermostat, L150-10F
Thermistor temp control
Automatic dry feature sensor assembly with mounting screws
Heating element assembly, 208 Volt
Heating element and housing assembly
Start doing it yourself with the confidence that comes with 100+ years of experience. We've got millions of parts, hundreds of brands, and thousands of step-by-step videos— everything you need to find it, fix it and finish the job right.
