Chrome drip bowl (also called a drip pan) for 8 inch burner on an electric range. The drip pan sits underneath the heating element to collect drips or spills around the burner.
Chrome drip bowl (also called a drip pan) for 6 inch burner on an electric range. The drip pan sits underneath the heating element to collect drips or spills around the burner.
Surface element control switch (also called the infinite switch) for 8 inch element. The surface element switch sends voltage to the surface element coil. If the switch is defective, the surface element will not work.
Stove top receptacle kit for electric stove surface elements. If the heating element operates intermittently then this terminal block or the elements terminals are likely corroded and both may need to be replaced.
8-inch diameter plug-in surface heating element with looped terminal ends. 5 turn. 2600 Watt. If your surface element won't heat, either the surface element or the surface element switch may be defective. To determine if the surface element is defective, use a multimeter to test it for continuity.
6-inch diameter plug-in surface heating element with looped terminal ends. 4 turn. 1500 Watt. If your surface element won't heat, either the surface element or the surface element switch may be defective. To determine if the surface element is defective, use a multimeter to test it for continuity.
Surface coil element replacement kit, 2 eight inch elements, 2 six inch elements, four receptacles and related hardware. If the terminal blocks and surface elements on your stove top are in bad shape this is the perfect kit to refresh the appliance.
Oven bake element. Electric ovens use 240 volts to operate the heating elements. If the oven does not bake check if there is a burned out section of the element.
Porcelain broiler pan set, aluminum grid allows juices to flow off food into the porcelain pan below, measures 1-1/2" x 12-3/4" x 16-3/4"
Surface element control switch (also called the infinite switch) for 6-inch element. The surface element switch sends voltage to the surface element coil. If the switch is defective, the surface element will not work.