Frigidaire Refrigerator Model FRS26HR4DQ4 Parts
Featured parts for Frigidaire Refrigerator
White refrigerator door shelf bin, bottom. Approximately 16" long x 4 1/4 " deep x 5 3/4 " tall.
Refrigerator water inlet valve assembly. If the icemaker or water dispenser no longer work the water valve may be defective.
Ice maker assembly with cover and wire harness. Makes 8 radius ice cubes. If the mold where cubes are made is flaking or corroded it is time for a new ice maker assembly. *Use model number to find correct icemaker.
The PureSource Plus filter is designed for filter systems located in the rear top-right of the refrigerator. Reduces up to 99% of contaminants, including lead and chlorine. Provides 200 gallons of filtered water. Replace every 6 months to ensure proper contaminant removal and optimal water flow.
Refrigerator shelf bin, white. This bin attaches to the inside of the fridge door and is wide enough to hold a gallon of milk.
Refrigerator defrost thermostat kit. The defrost thermostat monitors the temperature of the evaporator coils. When the coils drop below a set temperature, the thermostat sends power to the defrost heater. If the defrost thermostat is defective, the refrigerator will not defrost.
Evaporator fan motor kit, includes clips, terminal connectors, and instruction sheet *The motor has been updated by the manufacture. When the evaporator fan motor fails, it often generates a lot of noise in the freezer area.
Start doing it yourself with the confidence that comes with 100+ years of experience. We've got millions of parts, hundreds of brands, and thousands of step-by-step videos— everything you need to find it, fix it and finish the job right.
