40 Watt frosted appliance light bulb.
Oven igniter kit. Can replace igniters for either bake or broil burners. Replaces shorter and longer igniters in many instances. Amperage range is 3.3 - 3.6. If the igniter glows for more than 90 seconds without igniting the gas flame, this indicates that the igniter is too weak to open the valve.
Anti-tip bracket for freestanding range
Range leveling leg, black plastic. This leg may be shorter than the original but is the factory replacement. Longer leg is not available.
Oven ignitor, this item is also referred to as a glow bar. The igniter is mounted vertically on the burner tube. If the oven does not heat check if the igniter is glowing, if so then there is a good chance the igniter is weak and will need repalcement.
Sealed gas burner head assembly, 1 BLACK burner head with spark electrode. Rotate assembly counter clockwise to release burner from the main top. *No gasket seal required per manufacturer.
Sealed gas burner head assembly, 1 GRAY burner head with spark electrode. Rotate assembly counter clockwise to release burner from the main top. *No gasket seal required per manufacturer.
Oven sensor kit, short 3" long
Stove top spark electrode for burner.
Spark module for surface burners. This spark module provides power to the spark electrode to produce a spark. If it is defective, the burner may not light.