5-foot-long rubber fill hose for washing machines. Used for hot or cold water.
Washing machine tub counterbalance spring. This spring offsets the weight of the motor on the front of the washer. If broke, the tub will lean forward and the tub will be off balance during the spin cycle.
Washer agitator bolt with rubber gasket and thread sealant. Head is 7/16 inches in diameter.
Washing machine main tub seal
Heating element wire connector kit for electric dryers. If the wire & connector at the dryer heating element is bad this wire connector kit can be used to repair it.
Transmission (gearbox) for direct-drive washing machines. If the gears inside the transmission are worn out, the washer may not spin.
Dryer blower wheel.
To remove unscrew the blower wheel clockwise off the motor shaft.
Adjustable leveling leg for washing machine. This leveling leg has a rubber foot. If the leveling leg is not adjusted properly, the washer will be off-balance and will vibrate or shake during operation.
Washer drive block for inner tub. A worn drive block may cause the washer to spin slowly, causing the clothes to be soaked at the end of the cycle. The washer may also make a loud knocking noise at the beginning of the spin cycle.
Neutral Drain kit
Affresh® Washing Machine Tablets. Value pack of 6 tablets. Affresh Washer Cleaner tablets are designed to penetrate, dissolve and remove odor-causing residue that can occur in all washing machines.
Spray paint, white, 12 ounces
Washing machine tub suspension pads (package of 3). These pads help to absorb the movement of the washer tub. If a tub pad is worn, the washing machine will be unbalanced and will vibrate or shake during the spin cycle.
Washing machine agitator repair kit. Includes agitator cam and 4 directional cogs (also called dog ears). If the upper section of the agitator isn't turning properly, then the agitator cam and dog ears are likely worn-out and require replacement.