Kenmore Range/Stove/Oven Model 790.78879404 Parts
Featured parts for Kenmore Range/Stove/Oven
Oven door handle mounting screw. If the new screw will not keep the handle tight the handle may be stripped and will need to be replaced.
Oven bake burner igniter. If the oven does not heat check if the igniter is glowing. If so, it is likely weak and should be replaced. A defective igniter is the most common cause for a gas oven to not heat.
Oven anti-tip bracket kit. This bracket helps to secure the range and prevent it from tipping over.
Oven door glass
This is a glass heat barrier that is used as the middle or inner door glass depending on your model.
Oven igniter with wire connector. The igniter draws electrical current through the oven safety valve to open it. If the igniter glows for more than 90 seconds without igniting the gas flame, this indicates that the igniter is too weak to open the valve.
Oven sensor *Connector could be different than original. If so cut & splice wires together with porcelain wire nuts.
Gas burner supply tube assembly with orifice and spark igniter electrode, left front burner
Start doing it yourself with the confidence that comes with 100+ years of experience. We've got millions of parts, hundreds of brands, and thousands of step-by-step videos— everything you need to find it, fix it and finish the job right.
