Oven bake element. The terminals are male quarter inch spade connectors. The wires push onto the heating elements connectors. If the oven does not bake then the element could have burned out.
Oven bottom panel. Porcelain coated steel.
Range/stove surface element control switch repair kit. Compatible with a variety of models. The surface element switch sends voltage to the surface element coil. If the surface element is not heating, first test the surface element. If the element is not defective, the switch is likely at fault.
Oven anti-tip bracket kit. This bracket helps to secure the range and prevent it from tipping over.
Range/stove radiant surface element for 6-inch burner. 1200 watts. If the surface element is not heating, use a multimeter to test the element for continuity. If the element has continuity, the surface element switch is likely defective.
Electronic oven control board. The control board displays the time of day and controls the oven bake, broil, and self-cleaning functions. If your oven won't heat, test your oven's heating elements and confirm that the oven is receiving power before replacing the control board.
Oven bottom insulation
Rear drawer glide
Oven sensor *Connector could be different than original. If so cut & splice wires together with porcelain wire nuts.
Oven Door Handle
Screw,8-18 x 0.5 ,chrome
Oven door seal. 83 inches.
Terminal block kit,w/ground for range power cord
Paint, touch-up, white