Refrigerator icemaker. This item does not include a new shut off arm. To remove the existing shut off arm from the old icemaker, lift it to the up position, unhook it from the fill cup bearing, and pull it out of the module.
White touch-up paint. .6 oz.
Refrigerator crisper pan
Black appliance touch-up paint.
Spray paint, white, 12 ounces
All-purpose silicon grease, ½ oz. Not food grade.
Refrigerator icemaker water inlet valve. If the icemaker is making small or hollow cubes then the water inlet valve may be restricted and require replacement.
Refrigerator shelf retainer bar end cap, thin bar
Refrigerator evaporator fan motor. The evaporator fan motor draws air over the evaporator (cooling) coils and circulates the cold air through the refrigerator and freezer compartments.
Refrigerator icemaker control module and motor assembly. Located under the white cover of icemaker and controls ice ejector bar, heater and water inlet valve for the icemaker. If the icemaker is not making ice or making too much ice the model may be defective.
Touch-up paint, biscuit, .6 Fl. Oz.
Light bulb, frosted, 40 watt
1/4 inch plastic water line kit, approximately 72 inches. Tubing will need to be cut to match existing length.