Maytag Washer/Dryer Combo Model SG1000 Parts
Featured parts for Maytag Washer/Dryer Combo
Dryer door catch kit. Includes door catch and clip (plastic)
Three terminal door switch kit. Be aware that this switch replaces older 2 terminal switches.
Washing machine tub seal repair kit. This kit is for Maytag two belt washers. If the washing machine is leaking water from above the transmission this seal is likely damaged or worn out.
Screw, 10-24 3/8
Maytag two belt washing machine drain pump. If the washer does not drain then the pump could be clogged or defective.
Drum seal (front or rear) . 79 inches.
Injector tube and nozzle kit for the water inlet valve on a washer.
6 Foot fill hose, one straight & one elbow, requires 2 washers
Washing machine tub bearing repair kit. The tub bearing is mounted in the middle of the outer tub of the washing machine. The tub bearing helps to keep the inner tub spinning smoothly. If the tub bearing is defective, it may lock up and prevent the washer from spinning.
Hose clamp
Hose clamp
Tub to pump drain hose
Dryer high-limit thermostat, L220-40F. If the dryer overheats, this high-limit thermostat will cut off the power to the heating element. If the high-limit thermostat has blown, the dryer won't heat.
Siphon break connector with clamp
Adjustable leveling leg with stop-nut
Start doing it yourself with the confidence that comes with 100+ years of experience. We've got millions of parts, hundreds of brands, and thousands of step-by-step videos— everything you need to find it, fix it and finish the job right.
