1. Lower the temperature setting.
Odds are that youâ€™re keeping your water warmer than is necessary for your homeâ€™s needs. Most people mistakenly never check or adjust the temperature setting that was set during the water heaterâ€™s installation. Keeping the temperature high for several years may also reduce the water heaterâ€™s life expectancy. While youâ€™re sleeping, watching marathons of your favorite TV show or at work, the water heater is keeping the water unnecessarily hot! A temperature setting of 120 degrees Fahrenheit (48 degrees Celsius) is generally sufficient and safe for most households.
2. Use the vacation setting.
Taking a trip or leaving your home for an extended period? Tell your water heater thereâ€™s no need to store exceptionally warm water for nothing! Most water heaters have a handy vacation setting that enables you to dramatically reduce energy consumption while youâ€™re away. If your model does not have a vacation setting, select the lowest setting.
3. Donâ€™t install a water heater in an unheated room.
Whenever possible, avoid installing water heaters in unheated rooms such as garages, if you live in a cold-weather region. Unheated environments require the water heater to work harder to reach the set temperature; this results in increased energy consumption, possible freezing and makes the unit more susceptible to failures.
4. Insulate in cold-temp rooms.
Consider insulating the cold-water pipes and tank, if the water heater resides in a room that may drop below 50 degrees (such as a basement). RepairClinic water heater blankets with one and a half-inch and three-inch insulation thickness.
5. Drain it annually.
Natural sediment builds up in the water heater tank. Over time, this buildup reduces energy efficiency. Once per year, open the drain valve to flush out a few gallons of water from the tankâ€™s bottom to clear sediment buildup. A bucket or garden hose will work well for this. If you have sediment-rich water, you may need to drain the water heater twice annually. Note that itâ€™s wise to have a brass cap handy, in case the valve doesnâ€™t shut off properly from the sediment flush.
6. Check it monthly for leaks.
Discovering a leak early will avoid a highly damaging, major flood later. Like furnaces and air handlers, water heaters tend to be located in an area you donâ€™t visit daily such as a basement corner or utility closet. Make a note on your calendar every few weeks to inspect your water heater for leakage. Check the water line fittings and temperature and pressure relief valve for signs of leakage. If there is leakage at the bottom of the tank, the tank itself may need to be replaced.
What kind of water heater should I buy?
If youâ€™re in the market for a new water heater, consider a natural gas water heater, as it is the most cost-efficient option. If gas is not a possible option for you because of venting limitations, an electric water heater is an alternative.
Know someone who’d appreciate this post? Please share it.