Whats That Noise?

Whats That Noise?

It’s extremely important to pay attention to changes in performance of your appliances. Changes in operational sound indicate that key components are worn or damaged. Taking fast action to fix these issues may prevent expensive repairs and protect other components from premature failure.



Possible cause: A drum roller is worn out.

Possible solution: Inspect drum rollers for wear and replace as needed.

Fast, Rattling

Possible cause: A zipper, button, coin or other small object may be trapped in the blower wheel.

Possible solution: Remove blower wheel and inspect. Remove object, test operation and return to position.


Possible cause: A worn drum support roller and axle.

Possible solution: Inspect for wear or damage and replace if needed.


Possible cause: A fast, high-pitch squeal could be a faulty belt idler wheel. A slower, lower toned squeal may be caused by worn roller bearings or a faulty rear drum bearing.

Possible solution: Inspect the idler wheel rollers and drum bearings and replace as necessary.


General Loudness

Possible cause: Clogged or malfunctioning drain pump.

Possible solution: Remove debris from pump and replace as necessary.

Roaring or “freight-train” during wash cycle

Possible cause: Bad bearings in the circulation pump motor.

Possible solution: Inspect and replace the circulation pump motor or pump and motor assembly if necessary.

Squealing or chattering during water fill stage

Possible cause: Low, insufficient water pressure or clogged orifice or diaphragm in water inlet valve.

Possible solution: Check your home’s water supply. Dishwasher water pressure should be at least 20 psi. If the water pressure is sufficient, replace the water inlet valve.

Central Air Conditioner

Condensing unit notably louder

Possible cause: Worn or damaged fan blade or fan motor.

Possible solution: Replace these parts as needed.


Possible cause: Broken compressor motor mount.

Possible solution: Make sure the condensing unit is level and the compressor’s mounting bushings are intact. Adjust as needed. If the noise continues, the compressor’s internal motor mounts may need to be replaced. In some cases, it may be more cost effective to replace the entire condensing unit rather than replace those individual parts.


General increase in noise level

Possible cause: Debris in blower or faulty blower motor.

Possible solution: Clean debris from the blower wheel or replace blower motor.


Possible cause: If your furnace is equipped with a cooling coil or a combustion blower, water may be backing up from a clogged drain.

Possible solution: Check for obstructions in the drain line and clear as needed.


Periodic squeaking, squealing, chirping, or rumbling that is noticeably louder when the refrigerator door is open.

Possible cause: Worn evaporator motor.

Possible solution: Replace the evaporator motor.


Possible cause: Faulty defrost timer.

Possible solution: Replace it.

Popping and hissing/sizzling

Possible cause: Popping and hissing sounds are part of normal operations. If you open the freezer door, you may hear the frost melting into water and hitting the defrost heater, causing a hissing or sizzling sound. This noise may last for about 20 to 30 min.

Possible solution: N/A – it’s normal.

Remember, Repair Clinic has millions of appliance parts available for same-day shipping with a 365-day return policy.

Enter model number for recommendation

Log in to choose from Saved Products.

VIP Email List

Join our VIP Email List and get discounts and money-saving tips today:

Customer Reviews