Price Match Guarantee
Order by 2:00 a.m., and we'll ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Small Engine Ignition Coil Replacement
03:56
- Description
This video provides general information on small engine ignition coils and general installation guidelines.
Step By Step Instructions
1
Echo Back-Pack Leaf Blower - Model PB580T
2
Leaf Blower Ignition Coil Replacement
3
Tools Needed
4
You will need a T-27 Torx bit, a small amount of liquid dish soap for this procedure.
5
Hot
6
Make sure the engine has cooled and the on/off switch is in the ?off? position.
7
Spill
8
Be sure to perform this procedure with little or no fuel in the tank.
9
Use a T-27 Torx bit to unthread the four screws securing the starter.
10
Remove the wire and boot from the spark plug.
11
Unthread the five screws securing the engine cover.
12
Pry off the cover ? this may require some effort.
13
Set the leaf blower on its side and unthread the four screws securing the fuel tank retainer.
14
Set the fuel tank and retainer aside.
15
Unthread the screw securing the ignition coil cover, then detach the cover.
16
Rotate the flywheel magnets away from the ignition coil.
17
Unthread the ignition coil mounting screws.
18
Disconnect the grounding wire and remove the grommet.
19
Free the spark plug wire from the channel.
20
Use a small amount of liquid dish soap to lubricate the spark plug boot.
21
Pull the boot off of the wire and remove the terminal.
22
Fully remove the old ignition coil.
23
Prepare the new ignition coil for installation by transferring the wire sleeve from the old ignition coil to the new one.
24
Feed the wire under the carburetor.
25
Align the terminal on the wire and use pliers to help insert the end of the terminal through the insulation, then slide on the spark plug boot.
26
Connect the grounding wire to the new coil and slide on the grommet.
27
Position the ignition coil and thread the screws loosely.
28
Insert a business card between the coil and flywheel then rotate the flywheel to align the magnets with the coil.
29
Tighten the screws and remove the card.
30
Confirm the spark plug wire and grounding wire are fully inserted in the channel.
31
Reposition the ignition coil cover and thread the screw.
32
Realign the retainer on the fuel tank, then reposition the assembly on the frame.
33
Confirm the washers are in place on the screws?then thread the four screws to secure the retainer.
34
Reposition the engine cover.
35
Thread and tighten the screws.
36
Reattach the wire and boot to the spark plug.
37
Realign the starter, making sure the pulley engages with the starter pawls.
38
Thread the screws to secure the assembly.
39
Refill the fuel tank if necessary.
40
Congrats! Your leaf blower is ready for use.
Description
This video provides general information on small engine ignition coils and general installation guidelines.
Step-By-Step Instructions
1
Echo Back-Pack Leaf Blower - Model PB580T
2
Leaf Blower Ignition Coil Replacement
3
Tools Needed
4
You will need a T-27 Torx bit, a small amount of liquid dish soap for this procedure.
5
Hot
6
Make sure the engine has cooled and the on/off switch is in the ?off? position.
7
Spill
8
Be sure to perform this procedure with little or no fuel in the tank.
9
Use a T-27 Torx bit to unthread the four screws securing the starter.
10
Remove the wire and boot from the spark plug.
11
Unthread the five screws securing the engine cover.
12
Pry off the cover ? this may require some effort.
13
Set the leaf blower on its side and unthread the four screws securing the fuel tank retainer.
14
Set the fuel tank and retainer aside.
15
Unthread the screw securing the ignition coil cover, then detach the cover.
16
Rotate the flywheel magnets away from the ignition coil.
17
Unthread the ignition coil mounting screws.
18
Disconnect the grounding wire and remove the grommet.
19
Free the spark plug wire from the channel.
20
Use a small amount of liquid dish soap to lubricate the spark plug boot.
21
Pull the boot off of the wire and remove the terminal.
22
Fully remove the old ignition coil.
23
Prepare the new ignition coil for installation by transferring the wire sleeve from the old ignition coil to the new one.
24
Feed the wire under the carburetor.
25
Align the terminal on the wire and use pliers to help insert the end of the terminal through the insulation, then slide on the spark plug boot.
26
Connect the grounding wire to the new coil and slide on the grommet.
27
Position the ignition coil and thread the screws loosely.
28
Insert a business card between the coil and flywheel then rotate the flywheel to align the magnets with the coil.
29
Tighten the screws and remove the card.
30
Confirm the spark plug wire and grounding wire are fully inserted in the channel.
31
Reposition the ignition coil cover and thread the screw.
32
Realign the retainer on the fuel tank, then reposition the assembly on the frame.
33
Confirm the washers are in place on the screws?then thread the four screws to secure the retainer.
34
Reposition the engine cover.
35
Thread and tighten the screws.
36
Reattach the wire and boot to the spark plug.
37
Realign the starter, making sure the pulley engages with the starter pawls.
38
Thread the screws to secure the assembly.
39
Refill the fuel tank if necessary.
40
Congrats! Your leaf blower is ready for use.
Related Articles & Videos
03:07
Part Replacement
Briggs & Stratton Small Engine Ignition Coil Replacement Part # 593872
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com