Frigidaire Upright Freezer Replace Door Gasket #216522356

01:38
110k
307
This video provides step-by-step instructions for replacing the door gasket on Frigidaire upright freezers. The most common reasons for replacing the door gasket are if it is torn or defective, causing the door to leak and the evaporator coils to ice over.

All of the information in this door gasket replacement video is applicable to the following brands: Frigidaire, Kenmore, Crosley

Step By Step Instructions

1
To replace the door gasket on your freezer first loosen the screws securing the upper half of the inner door liner.
2
Pull the upper portion of the old door gasket free.
3
You’re now ready to begin installation of the new door gasket.
4
Align the upper portion of the new gasket by inserting the lip of the gasket behind the edge of the door liner.
5
Tighten the upper screws to secure this part of the gasket.
6
Now loosen the screws on the lower half of the inner door liner and pull the remainder of the old gasket free.
7
Fully align the new gasket and tighten all of the screws.
8
Once the gasket is fully installed, confirm that the door closes and seals properly.
Description
This video provides step-by-step instructions for replacing the door gasket on Frigidaire upright freezers. The most common reasons for replacing the door gasket are if it is torn or defective, causing the door to leak and the evaporator coils to ice over.

All of the information in this door gasket replacement video is applicable to the following brands: Frigidaire, Kenmore, Crosley
Step-By-Step Instructions
1
To replace the door gasket on your freezer first loosen the screws securing the upper half of the inner door liner.
2
Pull the upper portion of the old door gasket free.
3
You’re now ready to begin installation of the new door gasket.
4
Align the upper portion of the new gasket by inserting the lip of the gasket behind the edge of the door liner.
5
Tighten the upper screws to secure this part of the gasket.
6
Now loosen the screws on the lower half of the inner door liner and pull the remainder of the old gasket free.
7
Fully align the new gasket and tighten all of the screws.
8
Once the gasket is fully installed, confirm that the door closes and seals properly.

Applicable Product Model

Freezer
Brand
Product Type
Model
Subtype
Product Diagram & Manuals
Parts Needed
Recommended Tools and Accessories
Total$0.00

Related Articles & Videos

03:07
287k
541
Part Replacement
Frigidaire Upright Freezer Not Freezing? Repair Help #297250000
02:56
87k
120
Part Replacement
Frigidaire Upright Freezer Thermistor Replacement #297018400
01:05
100k
92
Part Replacement
Frigidaire Upright Freezer Control & Display Board #297370600
01:32
67k
95
Part Replacement
Frigidaire Upright Freezer Clicking Sound? #216954214