DescriptionThis video provides step-by-step repair instructions for replacing the control and display board on a Frigidaire upright freezer. The most common reasons for replacing the control board are when the freezer isn't cooling or the indicator light is out.
All of the information for this freezer control and display board replacement video is applicable to the following brands:
Frigidaire, Crosley
Step-By-Step Instructions1
As with any repair, you should unplug the power cord before beginning.
2
To replace the user control and display board on your freezer use a putty knife to help pry out the old board.
3
You can use tape to help protect the surface.
4
Install the new user control and display board by aligning the pins on the board with the pin connecter in the door and carefully snap the board into place.
5
With the new board installed, plug the power cord back in and confirm that the freezer is functioning properly.