Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Echo Chainsaw Chain Bar Replacement #14A0CD3752

03:01
10k
18
This video provides step-by-step instructions for replacing the chain bar on Echo chainsaws. The most common reason for replacing the chain bar is if it is bent or worn out, causing the chainsaw to not cut properly.

All of the information in this chain bar replacement video is applicable to the following brands: Echo

Step By Step Instructions

1
Before you replace the chain bar on your chainsaw first make sure the chainsaw’s engine has cooled.
2
Next, release the top cover clips and lift the cover off.
3
Remove the wire and boot from the spark plug to prevent the chainsaw from starting accidentally.
4
Now, remove the nuts securing the clutch cover.
5
Pull the cover off.
6
Remove the old chain bar and pull off the chain.
7
You’re now ready to install the new chain bar.
8
If applicable, transfer the chain guard from the old bar to the new one.
9
Now align the chain on the new bar.
10
Make sure the teeth on the chain are facing towards the front end of the chain bar on the top and away from the front end on the bottom.
11
Loop the chain onto the clutch sprockets as you align the bar on the mounting bolts.
12
To replace the cover, the chain tensioner will need to be inserted into the hole in the chain bar.
13
You will probably need to rotate the tension adjustment screw counter-clockwise to properly align the tensioner.
14
With the cover in place, hand-tighten the nuts.
15
Now lift the bar and rotate the adjustment screw clockwise until there is no slack in the chain.
16
Fully tighten the nuts and confirm that the chain is taut.
17
Attach the wire and boot to the spark plug.
18
Realign the top cover and secure it with the clips.
Description
This video provides step-by-step instructions for replacing the chain bar on Echo chainsaws. The most common reason for replacing the chain bar is if it is bent or worn out, causing the chainsaw to not cut properly.

All of the information in this chain bar replacement video is applicable to the following brands: Echo
Step-By-Step Instructions
1
Before you replace the chain bar on your chainsaw first make sure the chainsaw’s engine has cooled.
2
Next, release the top cover clips and lift the cover off.
3
Remove the wire and boot from the spark plug to prevent the chainsaw from starting accidentally.
4
Now, remove the nuts securing the clutch cover.
5
Pull the cover off.
6
Remove the old chain bar and pull off the chain.
7
You’re now ready to install the new chain bar.
8
If applicable, transfer the chain guard from the old bar to the new one.
9
Now align the chain on the new bar.
10
Make sure the teeth on the chain are facing towards the front end of the chain bar on the top and away from the front end on the bottom.
11
Loop the chain onto the clutch sprockets as you align the bar on the mounting bolts.
12
To replace the cover, the chain tensioner will need to be inserted into the hole in the chain bar.
13
You will probably need to rotate the tension adjustment screw counter-clockwise to properly align the tensioner.
14
With the cover in place, hand-tighten the nuts.
15
Now lift the bar and rotate the adjustment screw clockwise until there is no slack in the chain.
16
Fully tighten the nuts and confirm that the chain is taut.
17
Attach the wire and boot to the spark plug.
18
Realign the top cover and secure it with the clips.

Applicable Product Model

Parts Needed
Chain Bar
Chain Bar
$44.40
Total$0.00

Related Articles & Videos