Orders placed by 8:00 p.m. ET Monday through Friday will ship the same day.

Poulan Pole Pruner String Trimmer Primer Bulb #530047721

01:47
41k
35
This video provides step-by-step repair instructions for replacing the primer bulb on a Poulan Pro pole pruner with string trimmer attachment. The most common reasons for replacing the primer bulb are when the engine is leaking or the pole pruner/string trimmer won’t start.

All of the information for this primer bulb replacement video is applicable to the following brands:
Poulan, Poulan Pro, Craftsman, Husqvarna, Weedeater

Tools used: Torx head screwdriver, flathead screwdriver, snap ring pliers, slip joint pliers

Step By Step Instructions

1
Before you replace the primer bulb on your string trimmer and pruner first make sure the engine has cooled.
2
Next, remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Remove the screws securing the top cover and pull the cover off.
4
Note the orientation of the tubes on the primer bulb ports then pull the tubes off
5
Use pliers to depress the tabs on the primer bulb, and pull the old part out.
6
Install the new primer bulb by snapping it into the filter housing.
7
Attach the tubes to the appropriate ports.
8
It’s important to keep the tubes properly oriented.
9
Realign the top cover and replace the screws to secure.
10
Reattach the wire and boot to the spark plug and your string trimmer and pruner should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the primer bulb on a Poulan Pro pole pruner with string trimmer attachment. The most common reasons for replacing the primer bulb are when the engine is leaking or the pole pruner/string trimmer won’t start.

All of the information for this primer bulb replacement video is applicable to the following brands:
Poulan, Poulan Pro, Craftsman, Husqvarna, Weedeater

Tools used: Torx head screwdriver, flathead screwdriver, snap ring pliers, slip joint pliers
Step-By-Step Instructions
1
Before you replace the primer bulb on your string trimmer and pruner first make sure the engine has cooled.
2
Next, remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Remove the screws securing the top cover and pull the cover off.
4
Note the orientation of the tubes on the primer bulb ports then pull the tubes off
5
Use pliers to depress the tabs on the primer bulb, and pull the old part out.
6
Install the new primer bulb by snapping it into the filter housing.
7
Attach the tubes to the appropriate ports.
8
It’s important to keep the tubes properly oriented.
9
Realign the top cover and replace the screws to secure.
10
Reattach the wire and boot to the spark plug and your string trimmer and pruner should be ready for use.

Applicable Product Model

Parts Needed
Recommended Tools and Accessories
Fuel Tank
Fuel Tank
$29.18
Fuel Tank
Fuel Tank
$46.58
Total$0.00

Related Articles & Videos

03:12
108k
140
Part Replacement
Poulan Pro Pole Pruner Replace Carburetor #545189502
View Solution
01:33
116k
76
Part Replacement
Poulan Pro Pole Pruner Fuel Filter Replacement #530095646
View Solution
05:41
73k
131
Part Replacement
Poulan Pole Pruner Clutch Replacement #530055122
View Solution
03:57
56k
80
Part Replacement
Poulan Pole Pruner Replace Recoil Starter Pulley #545008049
View Solution