DescriptionThis video provides step-by-step repair instructions for replacing the spray wand on a Homelite pressure washer. The most common reasons for replacing the spray wand are when it is worn-out or is leaking.
All of the information for this spray wand replacement video is applicable to the following brands:
Homelite, PowerStroke, Black Max
Tools needed: 5/8 inch wrench
Step-By-Step Instructions1
To replace the spray wand on your pressure washer first unthread the old spray wand from the trigger handle.
2
Be prepared for some water to spill out.
3
Prepare the new spray wand for installation by transferring the nozzle from the old wand to the new one.
4
Remove the cap from the new wand apply some lubricant to the “o”-ring on the trigger handle then thread the new wand into the trigger handle.
5
Once installed, confirm that the new wand is working properly.