1-800-269-2609 24/7
Orders placed by 8:00 p.m. ET Monday through Friday will ship the same day.
Whirlpool Dishwasher Buttons Not Working? Repair #W10380381
Skill Level
Total Parts Cost
$60.67Estimated Savings
$112.5003:22
293k
306
- Description
This video provides step-by-step repair instructions for replacing the touchpad and control panel on a Whirlpool dishwasher. The most common reasons for replacing the control panel are when the dishwasher buttons don’t work, dishwasher lights are flashing or blinking, or the dishwasher won’t start.
All of the information for this dishwasher control panel replacement video is applicable to the following brands:
Whirlpool
Tools needed: multi screwdriver, 3/16 socket
All of the information for this dishwasher control panel replacement video is applicable to the following brands:
Whirlpool
Tools needed: multi screwdriver, 3/16 socket
Step By Step Instructions
1
As with any repair, be sure to turn off the power to your dishwasher before beginning.
2
To replace the control panel and touch pad, your first step is to open the dishwasher door and remove the screws securing the outer door panel.
3
With the screws removed, pull the panel down then lift it up and out.
4
Next, remove the screws securing the control panel.
5
Pull the panel off.
6
Next, pull the tabs back to release the door latch assembly.
7
Now remove the screws securing the control board to the panel.
8
Pull the tabs back to release the board
9
You’re now ready to prepare the new control panel and touch pad for installation.
10
Detach the light tube and the button actuators from the old panel.
11
Align each of them on the new panel and snap them into position.
12
Install the control board by aligning it in the control panel and snapping it into place.
13
Reinstall the screws to secure.
14
Align the door latch assembly on the control panel and snap it into place.
15
Align the new control panel on the door and replace the screws to secure.
16
Reinstall the outer door panel by first aligning it on the door hinges then slide the panel up and reinstall the screws in the inner panel to secure.
17
You’re now ready to restore power to the dishwasher and confirm that it’s working properly.
Description
This video provides step-by-step repair instructions for replacing the touchpad and control panel on a Whirlpool dishwasher. The most common reasons for replacing the control panel are when the dishwasher buttons don’t work, dishwasher lights are flashing or blinking, or the dishwasher won’t start.
All of the information for this dishwasher control panel replacement video is applicable to the following brands:
Whirlpool
Tools needed: multi screwdriver, 3/16 socket
All of the information for this dishwasher control panel replacement video is applicable to the following brands:
Whirlpool
Tools needed: multi screwdriver, 3/16 socket
Step-By-Step Instructions
1
As with any repair, be sure to turn off the power to your dishwasher before beginning.
2
To replace the control panel and touch pad, your first step is to open the dishwasher door and remove the screws securing the outer door panel.
3
With the screws removed, pull the panel down then lift it up and out.
4
Next, remove the screws securing the control panel.
5
Pull the panel off.
6
Next, pull the tabs back to release the door latch assembly.
7
Now remove the screws securing the control board to the panel.
8
Pull the tabs back to release the board
9
You’re now ready to prepare the new control panel and touch pad for installation.
10
Detach the light tube and the button actuators from the old panel.
11
Align each of them on the new panel and snap them into position.
12
Install the control board by aligning it in the control panel and snapping it into place.
13
Reinstall the screws to secure.
14
Align the door latch assembly on the control panel and snap it into place.
15
Align the new control panel on the door and replace the screws to secure.
16
Reinstall the outer door panel by first aligning it on the door hinges then slide the panel up and reinstall the screws in the inner panel to secure.
17
You’re now ready to restore power to the dishwasher and confirm that it’s working properly.
Applicable Product Model
Related Articles & Videos
02:01
23k
66
Part Replacement
Whirlpool Dishwasher Water Supply Line Adapter Replacement (W10685193)
06:04
680k
2.5k
Part Replacement
Whirlpool Dishwasher Replace Pump and Motor Assembly #W10482480
02:50
333k
565
Part Replacement
Whirlpool Dishwasher Mounting Bracket Installation #8269145
02:43
219k
460
Part Replacement
Whirlpool Dishwasher Not Cleaning Dishes Properly? #W10327250
About Us
Start doing it yourself with the confidence that comes with 100+ years of experience. We've got millions of parts, hundreds of brands, and thousands of step-by-step videos— everything you need to find it, fix it and finish the job right.
© 2023 RepairClinic.com1‑800‑269‑2609
