Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Skuttle Humidifier Water Pan Replacement #A00-0602-039

loading...

01:54
12k
21
This video provides step-by-step instructions for replacing the water pan on Skuttle humidifiers. The main reason for replacing the water pan is if it is cracked or leaking in any way, preventing the humidifier from working.

All the information in this water pan replacement video is applicable to the following brands: Skuttle

Step By Step Instructions

1
To replace the water pan in your humidifier first turn off the power to the furnace
2
Shut off the water to the humidifier.
3
Push the humidifier cover down to release the tabs then pull the cover off.
4
Next, pull the duct side of the drum shaft out of the bushing to remove the filter assembly.
5
Use a sponge or cup to remove as much water from the old tray as possible.
6
Now lift up the float and carefully remove the old pan.
7
Install the new water pan by lifting up the float and positioning the pan so its overflow port aligns with the drain tube.
8
With the pan in place reinstall the filter assembly by inserting the drive side of the shaft into the motor bushing then snap the opposite end of the shaft into the duct bushing.
9
Replace the cover by inserting the tabs into the slots in the housing then lower the cover and pull it into position.
10
You can now turn the water supply back on and restore power to the furnace to confirm that the humidifier is working properly.
Description
This video provides step-by-step instructions for replacing the water pan on Skuttle humidifiers. The main reason for replacing the water pan is if it is cracked or leaking in any way, preventing the humidifier from working.

All the information in this water pan replacement video is applicable to the following brands: Skuttle
Step-By-Step Instructions
1
To replace the water pan in your humidifier first turn off the power to the furnace
2
Shut off the water to the humidifier.
3
Push the humidifier cover down to release the tabs then pull the cover off.
4
Next, pull the duct side of the drum shaft out of the bushing to remove the filter assembly.
5
Use a sponge or cup to remove as much water from the old tray as possible.
6
Now lift up the float and carefully remove the old pan.
7
Install the new water pan by lifting up the float and positioning the pan so its overflow port aligns with the drain tube.
8
With the pan in place reinstall the filter assembly by inserting the drive side of the shaft into the motor bushing then snap the opposite end of the shaft into the duct bushing.
9
Replace the cover by inserting the tabs into the slots in the housing then lower the cover and pull it into position.
10
You can now turn the water supply back on and restore power to the furnace to confirm that the humidifier is working properly.

Applicable Product Model

Parts Needed
Water Pan
Water Pan
$17.58
Total$0.00

Related Articles & Videos