Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Toro Leaf Blower Mulching Blade Replacement #678114001

02:19
10k
5
This video provides step-by-step instructions for replacing the mulching blade on Toro and Ryobi leaf blowers. The most common reason for replacing the mulching blade is if it damaged, causing it to not work as well as it should.

All of the information in this mulching blade replacement video is applicable to the following brands: Toro, Ryobi

Tools used: spark plug wrench, T25 Torx screwdriver, rope, flat-head screwdriver, 13mm socket

Step By Step Instructions

1
Before you replace the mulching blade on your leaf blower first make sure the engine has cooled.
2
Next, remove the wire and boot from the spark plug.
3
Use a socket or spark plug wrench to help unthread the spark plug.
4
Now confirm that the piston is in the “down” position.
5
Insert a cord into the cylinder to prevent the piston from moving.
6
Use a flathead screwdriver to depress the tab to open the air intake cover.
7
Use a 13mm socket to remove the nut securing the mulching blade.
8
Pull the old blade off.
9
Install the new mulching blade by aligning it on the crankshaft.
10
Then thread and tighten the nut to secure.
11
Snap the air intake cover shut.
12
Remove the cord from the cylinder.
13
Rethread the spark plug.
14
Be careful not to over tighten.
15
Reattach the wire and boot to the spark plug and your leaf blower should be ready for use.
Description
This video provides step-by-step instructions for replacing the mulching blade on Toro and Ryobi leaf blowers. The most common reason for replacing the mulching blade is if it damaged, causing it to not work as well as it should.

All of the information in this mulching blade replacement video is applicable to the following brands: Toro, Ryobi

Tools used: spark plug wrench, T25 Torx screwdriver, rope, flat-head screwdriver, 13mm socket
Step-By-Step Instructions
1
Before you replace the mulching blade on your leaf blower first make sure the engine has cooled.
2
Next, remove the wire and boot from the spark plug.
3
Use a socket or spark plug wrench to help unthread the spark plug.
4
Now confirm that the piston is in the “down” position.
5
Insert a cord into the cylinder to prevent the piston from moving.
6
Use a flathead screwdriver to depress the tab to open the air intake cover.
7
Use a 13mm socket to remove the nut securing the mulching blade.
8
Pull the old blade off.
9
Install the new mulching blade by aligning it on the crankshaft.
10
Then thread and tighten the nut to secure.
11
Snap the air intake cover shut.
12
Remove the cord from the cylinder.
13
Rethread the spark plug.
14
Be careful not to over tighten.
15
Reattach the wire and boot to the spark plug and your leaf blower should be ready for use.

Applicable Product Model

Parts Needed
Total$0.00

Related Articles & Videos