Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Samsung Front-Load Washer Replace Noise Filter #DC29-00013H

02:00
20k
28
This video provides step-by-step repair instructions for replacing the noise filter on a Samsung front-loading washing machine. The most common reason for replacing the noise filter is when it is damaged during a power surge.

All of the information for this noise filter replacement video is applicable to the following brands:
Samsung

Tools used: multi-screwdriver, Phillips head bit, 13mm socket

Step By Step Instructions

1
To replace the ac noise filter in your washer, first remove the screws at the back securing the top panel
2
Now slide the panel back and lift it off.
3
Use a 13mm socket to loosen the noise filter mounting nut and detach the filter from the bracket.
4
Now disconnect the wire harnesses to fully remove the old filter.
5
Install the new ac noise filter by first connecting the wire harnesses.
6
Make sure the mounting nut is loose then position the noise filter on the bracket and tighten the nut.
7
Reposition the top panel by aligning the edge of the panel with the tabs on the support bracket then push forward.
8
Replace the screws in the back.
9
With the repair complete, plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the noise filter on a Samsung front-loading washing machine. The most common reason for replacing the noise filter is when it is damaged during a power surge.

All of the information for this noise filter replacement video is applicable to the following brands:
Samsung

Tools used: multi-screwdriver, Phillips head bit, 13mm socket
Step-By-Step Instructions
1
To replace the ac noise filter in your washer, first remove the screws at the back securing the top panel
2
Now slide the panel back and lift it off.
3
Use a 13mm socket to loosen the noise filter mounting nut and detach the filter from the bracket.
4
Now disconnect the wire harnesses to fully remove the old filter.
5
Install the new ac noise filter by first connecting the wire harnesses.
6
Make sure the mounting nut is loose then position the noise filter on the bracket and tighten the nut.
7
Reposition the top panel by aligning the edge of the panel with the tabs on the support bracket then push forward.
8
Replace the screws in the back.
9
With the repair complete, plug the power cord back in and your washer should be ready for use.

Applicable Product Model

Parts Needed
Recommended Tools and Accessories
Cleaner
Cleaner
$8.99
Total$0.00

Related Articles & Videos