GE Microwave Door Replace Switch, Upper & Lower #WB24X829

02:49
156k
318
This video provides step-by-step repair instructions for replacing the upper and lower door switches on a GE microwave. The most common reason for replacing the door switch is when the microwave display is working but the microwave won’t start.

All of the information for this door switch replacement video is applicable to the following brands:
GE, Hotpoint, RCA, Kenmore

Tools used: multi-screwdriver, Phillips head bit, T15 Torx bit

Step By Step Instructions

1
Because of the high voltage and high current used by microwave ovens, be aware that repairing this appliance poses a substantial risk for injury or death if precautions are not taken.
2
You should always unplug the microwave before you attempt any disassembly.
3
To replace the upper or lower door switch in your microwave open the door and remove the screws securing the grill.
4
Slide the grill to the left to release it.
5
Next, remove the screw on the left securing the control panel and loosen the screw behind the panel.
6
Lift the panel up and pull it forward to detach.
7
Now remove the screws to release the switch assembly.
8
Depress the release tab and the actuator to detach the switch you’re replacing.
9
Disconnect the wire connecter to fully release the old switch.
10
Install the new door switch by first connecting the wire connecter.
11
Now position the new switch in the assembly and snap it into place.
12
Realign the switch assembly on the frame and replace the screws to secure.
13
Reposition the control panel.
14
Tighten the screw behind the panel and replace the screw on the left.
15
Reposition the grill slide it to the right and replace the screws.
16
With the repair completed, plug the power cord back in and your microwave oven should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the upper and lower door switches on a GE microwave. The most common reason for replacing the door switch is when the microwave display is working but the microwave won’t start.

All of the information for this door switch replacement video is applicable to the following brands:
GE, Hotpoint, RCA, Kenmore

Tools used: multi-screwdriver, Phillips head bit, T15 Torx bit
Step-By-Step Instructions
1
Because of the high voltage and high current used by microwave ovens, be aware that repairing this appliance poses a substantial risk for injury or death if precautions are not taken.
2
You should always unplug the microwave before you attempt any disassembly.
3
To replace the upper or lower door switch in your microwave open the door and remove the screws securing the grill.
4
Slide the grill to the left to release it.
5
Next, remove the screw on the left securing the control panel and loosen the screw behind the panel.
6
Lift the panel up and pull it forward to detach.
7
Now remove the screws to release the switch assembly.
8
Depress the release tab and the actuator to detach the switch you’re replacing.
9
Disconnect the wire connecter to fully release the old switch.
10
Install the new door switch by first connecting the wire connecter.
11
Now position the new switch in the assembly and snap it into place.
12
Realign the switch assembly on the frame and replace the screws to secure.
13
Reposition the control panel.
14
Tighten the screw behind the panel and replace the screw on the left.
15
Reposition the grill slide it to the right and replace the screws.
16
With the repair completed, plug the power cord back in and your microwave oven should be ready for use.

Applicable Product Model

Microwave
Brand
Product Type
Model
Subtype
Product Diagram & Manuals
Parts Needed
Recommended Tools and Accessories
Total$0.00

Related Articles & Videos

00:00
0
0
Part Testing
Microwave Won’t Work? Two Terminal Switch Testing
00:00
0
0
Part Testing
Oven Not Self-Cleaning? Two Terminal Switch Testing
00:00
0
0
Disassembly
Microwave Disassembly – Microwave Repair
02:40
428k
598
Part Replacement
GE Microwave Won't Work? Replace Thermal Fuse #WB27X1127