York Furnace Pressure Switch Replacement #S1-02435780000

loading...

01:43
11k
12
This video provides step-by-step repair instructions for replacing the upper pressure switch on a York furnace. The most common reasons for replacing the pressure switch are when the furnace doesn’t heat or shuts off after a few minutes.

All of the information for this upper pressure switch replacement video is applicable to the following brands:
York

Tools used: multi screwdriver, flat head bit, Phillips head bit

Step By Step Instructions

1
To replace the upper pressure switch in your furnace first shut off the power to the furnace.
2
Next, rotate the knobs securing the combustion chamber panel and pull the panel off.
3
Now disconnect the pressure switch wires.
4
Detach the vacuum tube.
5
Use a small phillips-head screwdriver to remove the pressure switch mounting screw and pull the old switch off.
6
Install the new pressure switch by aligning it on the draft inducer housing then replace the mounting screw to secure.
7
Attach the vacuum tube and connect the wires.
8
Reposition the combustion chamber panel and rotate the knobs to secure.
9
With the repair completed, turn the power back on and your furnace should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the upper pressure switch on a York furnace. The most common reasons for replacing the pressure switch are when the furnace doesn’t heat or shuts off after a few minutes.

All of the information for this upper pressure switch replacement video is applicable to the following brands:
York

Tools used: multi screwdriver, flat head bit, Phillips head bit
Step-By-Step Instructions
1
To replace the upper pressure switch in your furnace first shut off the power to the furnace.
2
Next, rotate the knobs securing the combustion chamber panel and pull the panel off.
3
Now disconnect the pressure switch wires.
4
Detach the vacuum tube.
5
Use a small phillips-head screwdriver to remove the pressure switch mounting screw and pull the old switch off.
6
Install the new pressure switch by aligning it on the draft inducer housing then replace the mounting screw to secure.
7
Attach the vacuum tube and connect the wires.
8
Reposition the combustion chamber panel and rotate the knobs to secure.
9
With the repair completed, turn the power back on and your furnace should be ready for use.

Applicable Product Model

Furnace
Brand
Product Type
Model
Subtype
Parts Needed
Total$0.00

Related Articles & Videos