Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Frigidaire Electric Range/Stove Terminal Block #5304409888

01:57
152k
209
This video provides step-by-step repair instructions for replacing the terminal block on a Frigidaire electric range. The most common reason for replacing the terminal block is when the stove surface element isn’t working.

All of the information for this terminal block replacement video is applicable to the following brands:
Frigidaire, Kenmore, Tappan, Westinghouse, Universal, Kelvinator, Gibson, Electrolux, Montgomery Wards, Crosley

Tools needed: 14” nut driver, Phillips head screwdriver

Step By Step Instructions

1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the lower back panel.
3
Note where all the wires are connected.
4
Now, remove the power cord wires along with the grounding wire if applicable to your model followed by the range power supply wires.
5
Remove the mounting screws to release the old terminal block.
6
Install the new terminal block by first securing it with the mounting screws.
7
Once mounted, attach the range power supply wires and washers to the terminal posts and secure with the nuts.
8
Next, place the second set of washers onto the posts followed by the power cord wires and use the remaining nuts to secure.
9
Attach the grounding wire if applicable
10
Once all the wires are attached to new block replace the back panel and plug the appliance back in to make sure it’s functioning properly.
Description
This video provides step-by-step repair instructions for replacing the terminal block on a Frigidaire electric range. The most common reason for replacing the terminal block is when the stove surface element isn’t working.

All of the information for this terminal block replacement video is applicable to the following brands:
Frigidaire, Kenmore, Tappan, Westinghouse, Universal, Kelvinator, Gibson, Electrolux, Montgomery Wards, Crosley

Tools needed: 14” nut driver, Phillips head screwdriver
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the lower back panel.
3
Note where all the wires are connected.
4
Now, remove the power cord wires along with the grounding wire if applicable to your model followed by the range power supply wires.
5
Remove the mounting screws to release the old terminal block.
6
Install the new terminal block by first securing it with the mounting screws.
7
Once mounted, attach the range power supply wires and washers to the terminal posts and secure with the nuts.
8
Next, place the second set of washers onto the posts followed by the power cord wires and use the remaining nuts to secure.
9
Attach the grounding wire if applicable
10
Once all the wires are attached to new block replace the back panel and plug the appliance back in to make sure it’s functioning properly.

Applicable Product Model

Parts Needed
Recommended Tools and Accessories
Total$0.00

Related Articles & Videos