DescriptionThis video provides step-by-step instructions for replacing the light socket on Frigidaire electric ranges. The most common reason for replacing the light socket is if the light in the range is not turning on but the bulb has not burned out and the light switch has continuity.
All of the information in this light socket replacement video is applicable to the following brands: Frigidaire, Kenmore, Tappan, Westinghouse, Gibson, Universal, Crosley, Kelvinator, Montgomery Wards, Admiral
Tools used: 14” nut driver
Step-By-Step Instructions1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the oven racks.
3
Next, release the wire retainer to remove the light lens cover.
5
Remove the lower back panel and detach the wires from the old light socket.
6
Squeeze the mounting clips to release the old socket and pull it out.
7
Install the new light socket by snapping it into the oven cavity.
8
Attach the wires and replace the back panel.
9
Screw in the light bulb then replace the lens cover and secure it with the wire retainer.
10
Replace the oven racks and plug the appliance back in to make sure the socket is functioning properly.