Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Briggs & Stratton Generator 220V Outlet Receptacle #204075GS

loading...

04:00
11k
26
This video provides step-by-step repair instructions for replacing the 220V outlet receptacle on a Briggs and Stratton generator. The most common reason for replacing the outlet receptacle is when it is damaged.

All of the information for this 220V outlet receptacle replacement video is applicable to the following brands:
Briggs and Stratton, Snapper

Tools used: multi screwdriver, 3/8 inch socket, Phillips head bit

Step By Step Instructions

1
Before you replace the 220 volt receptacle in your generator first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Use a 3/8th inch socket with an extension to remove the nuts securing the outlet housing.
4
Pull the housing free of the bracket and disconnect the power harness.
5
Now use a phillips-head screwdriver to remove the screws to release the outlet cover.
6
Use the 3/8th inch socket to remove the nuts securing the receptacle.
7
Note the orientation of the wires then loosen the screws to release the wires from the old receptacle.
8
You’re now ready to install the new receptacle.
9
Insert the wire into the appropriate terminals and tighten the screws.
10
With the wires secured, align the new receptacle on the housing posts and replace the nuts to secure.
11
Reposition the outlet housing cover and replace the screws to secure.
12
Reconnect the power harness.
13
Reposition the outlet housing on the bracket and rethread the nuts to secure.
14
Reattach the wire and boot to the spark plug and your generator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the 220V outlet receptacle on a Briggs and Stratton generator. The most common reason for replacing the outlet receptacle is when it is damaged.

All of the information for this 220V outlet receptacle replacement video is applicable to the following brands:
Briggs and Stratton, Snapper

Tools used: multi screwdriver, 3/8 inch socket, Phillips head bit
Step-By-Step Instructions
1
Before you replace the 220 volt receptacle in your generator first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Use a 3/8th inch socket with an extension to remove the nuts securing the outlet housing.
4
Pull the housing free of the bracket and disconnect the power harness.
5
Now use a phillips-head screwdriver to remove the screws to release the outlet cover.
6
Use the 3/8th inch socket to remove the nuts securing the receptacle.
7
Note the orientation of the wires then loosen the screws to release the wires from the old receptacle.
8
You’re now ready to install the new receptacle.
9
Insert the wire into the appropriate terminals and tighten the screws.
10
With the wires secured, align the new receptacle on the housing posts and replace the nuts to secure.
11
Reposition the outlet housing cover and replace the screws to secure.
12
Reconnect the power harness.
13
Reposition the outlet housing on the bracket and rethread the nuts to secure.
14
Reattach the wire and boot to the spark plug and your generator should be ready for use.

Applicable Product Model

Parts Needed
Total$0.00

Related Articles & Videos