Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more
Frigidaire Electric Oven Broil Element Replacement #316199900
Skill Level
Total Parts Cost
$136.04Estimated Savings
$112.5001:41
34k
38
- Description
This video provides step-by-step repair instructions for replacing the broil element on a Frigidaire electric range. The most common reasons for replacing the broil element are when the oven doesn’t bake evenly, won’t heat, won’t turn off, or won’t turn on.
All of the information for this broil element replacement video is applicable to the following brands:
Frigidaire, Kenmore, Crosley, Tappan, Westinghouse, Kelvinator, Gibson, Universal
Tools needed: 14” nut driver
All of the information for this broil element replacement video is applicable to the following brands:
Frigidaire, Kenmore, Crosley, Tappan, Westinghouse, Kelvinator, Gibson, Universal
Tools needed: 14” nut driver
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the oven racks.
3
Next, remove the mounting screws securing the old broil element then remove the screws to detach the support brackets.
4
Disconnect the two wires and remove the old element.
5
Be aware that if you are unable to easily reach the wires you may need to remove the back panel to access them.
6
Install the new broil element by connecting the wires then gently position the element into the oven cavity.
7
Reinstall the support brackets and screws then secure the element’s mounting screws.
8
Replace the back panel if necessary.
9
Replace the oven racks and plug the appliance back in to make sure it’s functioning properly.
Description
This video provides step-by-step repair instructions for replacing the broil element on a Frigidaire electric range. The most common reasons for replacing the broil element are when the oven doesn’t bake evenly, won’t heat, won’t turn off, or won’t turn on.
All of the information for this broil element replacement video is applicable to the following brands:
Frigidaire, Kenmore, Crosley, Tappan, Westinghouse, Kelvinator, Gibson, Universal
Tools needed: 14” nut driver
All of the information for this broil element replacement video is applicable to the following brands:
Frigidaire, Kenmore, Crosley, Tappan, Westinghouse, Kelvinator, Gibson, Universal
Tools needed: 14” nut driver
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the oven racks.
3
Next, remove the mounting screws securing the old broil element then remove the screws to detach the support brackets.
4
Disconnect the two wires and remove the old element.
5
Be aware that if you are unable to easily reach the wires you may need to remove the back panel to access them.
6
Install the new broil element by connecting the wires then gently position the element into the oven cavity.
7
Reinstall the support brackets and screws then secure the element’s mounting screws.
8
Replace the back panel if necessary.
9
Replace the oven racks and plug the appliance back in to make sure it’s functioning properly.
Applicable Product Model
Parts Needed
Broil Element
$136.04
Total$0.00
About Us
Start doing it yourself with the confidence that comes with 100+ years of experience. We've got millions of parts, hundreds of brands, and thousands of step-by-step videos— everything you need to find it, fix it and finish the job right.
© 2022 RepairClinic.com1‑800‑269‑2609
