Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Frigidaire Electric Range Oven Door Light Switch #316445501

01:22
36k
37
This video provides step-by-step repair instructions for replacing the oven door light switch on a Frigidaire electric range. The most common reason for replacing the door light switch is when the oven light is out.

All of the information for this oven door light switch replacement video is applicable to the following brands:
Frigidaire, Kenmore, Electrolux, Crosley, Tappan, Westinghouse, Kelvinator, Gibson, Universal

Tools needed: Phillips head screwdriver

Step By Step Instructions

1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to open the oven door and remove the screws securing the main top.
3
Once the screws are removed, close the over door and lift the main top up.
4
Use a sturdy object to support it.
5
Detach the wire connector and squeeze the tab to release the old door light switch.
6
Install the new door light switch
7
By snapping it into the frame.
8
Attach the wire connector.
9
Remove the support and lower the main top.
10
Secure the main top by reinstalling the screws.
11
You’re now ready to plug the appliance back in to make sure the door light switch is functioning properly.
Description
This video provides step-by-step repair instructions for replacing the oven door light switch on a Frigidaire electric range. The most common reason for replacing the door light switch is when the oven light is out.

All of the information for this oven door light switch replacement video is applicable to the following brands:
Frigidaire, Kenmore, Electrolux, Crosley, Tappan, Westinghouse, Kelvinator, Gibson, Universal

Tools needed: Phillips head screwdriver
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to open the oven door and remove the screws securing the main top.
3
Once the screws are removed, close the over door and lift the main top up.
4
Use a sturdy object to support it.
5
Detach the wire connector and squeeze the tab to release the old door light switch.
6
Install the new door light switch
7
By snapping it into the frame.
8
Attach the wire connector.
9
Remove the support and lower the main top.
10
Secure the main top by reinstalling the screws.
11
You’re now ready to plug the appliance back in to make sure the door light switch is functioning properly.

Applicable Product Model

Parts Needed
Recommended Tools and Accessories
Total$0.00

Related Articles & Videos