Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more
Edger Blade Replacement – Weed Eater Edger #530095086
Skill Level
Total Parts Cost
$7.43Estimated Savings
$112.5001:39
15k
24
- Description
This video provides step-by-step instructions for replacing the edger blade on Weed Eater edgers. The most common reason for replacing the blade is when it is dull.
All of the information in this blade replacement video is applicable to the following brands: Weed Eater, Husqvarna
Tools used: screwdriver, 11/16” socket
All of the information in this blade replacement video is applicable to the following brands: Weed Eater, Husqvarna
Tools used: screwdriver, 11/16” socket
Step By Step Instructions
1
Before you replace the blade on your edger first make sure the engine has cooled.
2
Next, remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Insert a screwdriver into the housing to prevent the blade from rotating then use an 11/16th inch socket to loosen the mounting nut by rotating it clockwise.
4
Unthread the nut then remove the washer and the old blade.
5
Install the new blade by positioning it on the shaft.
6
Replace the washer, thread the nut and tighten to secure.
7
With the repair completed reattach the spark plug wire and boot and your edger should be ready for use.
Description
This video provides step-by-step instructions for replacing the edger blade on Weed Eater edgers. The most common reason for replacing the blade is when it is dull.
All of the information in this blade replacement video is applicable to the following brands: Weed Eater, Husqvarna
Tools used: screwdriver, 11/16” socket
All of the information in this blade replacement video is applicable to the following brands: Weed Eater, Husqvarna
Tools used: screwdriver, 11/16” socket
Step-By-Step Instructions
1
Before you replace the blade on your edger first make sure the engine has cooled.
2
Next, remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Insert a screwdriver into the housing to prevent the blade from rotating then use an 11/16th inch socket to loosen the mounting nut by rotating it clockwise.
4
Unthread the nut then remove the washer and the old blade.
5
Install the new blade by positioning it on the shaft.
6
Replace the washer, thread the nut and tighten to secure.
7
With the repair completed reattach the spark plug wire and boot and your edger should be ready for use.
Applicable Product Model
Parts Needed
Edger Blade
$7.43
Recommended Tools and Accessories
Safety Glasses
$17.20
Safety Glasses
$17.20
Safety Glasses
$17.20
Edger Blade
$5.59
Fuel Tank
$29.18
Fuel Tank
$46.58
Total$0.00
About Us
Start doing it yourself with the confidence that comes with 100+ years of experience. We've got millions of parts, hundreds of brands, and thousands of step-by-step videos— everything you need to find it, fix it and finish the job right.
© 2022 RepairClinic.com1‑800‑269‑2609
