Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more
Weed Eater Edger Air Filter Replacement #530036664
Skill Level
Total Parts Cost
$3.90Estimated Savings
$112.5001:34
1.6k
3
- Description
This video provides step-by-step repair instructions for replacing the air filter on a Weed Eater edger. The most common reason for replacing the air filter is when it is clogged and the edger runs poorly or stops after a few seconds.
All of the information for this air filter replacement video is applicable to the following brands:
Craftsman, Weed Eater
Tools used: T25 Torx bit screwdriver
All of the information for this air filter replacement video is applicable to the following brands:
Craftsman, Weed Eater
Tools used: T25 Torx bit screwdriver
Step By Step Instructions
1
Before you replace the air filter on your edger first make sure the engine has cooled.
2
Next, remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Use a t-25 torx bit screwdriver to unthread the screws securing the air filter cover.
4
Pull the cover off and remove the old air filter.
5
Install the new air filter by inserting it into the blower housing.
6
Replace the cover and rethread the screws to secure.
7
Reattach the spark plug wire and boot and your edger should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the air filter on a Weed Eater edger. The most common reason for replacing the air filter is when it is clogged and the edger runs poorly or stops after a few seconds.
All of the information for this air filter replacement video is applicable to the following brands:
Craftsman, Weed Eater
Tools used: T25 Torx bit screwdriver
All of the information for this air filter replacement video is applicable to the following brands:
Craftsman, Weed Eater
Tools used: T25 Torx bit screwdriver
Step-By-Step Instructions
1
Before you replace the air filter on your edger first make sure the engine has cooled.
2
Next, remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Use a t-25 torx bit screwdriver to unthread the screws securing the air filter cover.
4
Pull the cover off and remove the old air filter.
5
Install the new air filter by inserting it into the blower housing.
6
Replace the cover and rethread the screws to secure.
7
Reattach the spark plug wire and boot and your edger should be ready for use.
Applicable Product Model
Parts Needed
Air Filter
$3.90
Total$0.00
About Us
Start doing it yourself with the confidence that comes with 100+ years of experience. We've got millions of parts, hundreds of brands, and thousands of step-by-step videos— everything you need to find it, fix it and finish the job right.
© 2022 RepairClinic.com1‑800‑269‑2609
