Orders placed by 8:00 p.m. ET Monday through Friday will ship the same day.

Frigidaire Electric Stove Surface Element, Small #318178110

01:58
37k
39
This video provides step-by-step instructions for replacing the small surface element burner (rear) on Frigidaire electric ranges. The most common reasons for replacing the burner is when the surface element won’t work or won’t turn off.

All of the information in this burner replacement video is applicable to the following brands: Frigidaire, Kenmore, Crosley, Electrolux, Westinghouse, Kelvinator, Tappan, Gibson

Tools used: Phillips head screwdriver, 14” nut driver

Step By Step Instructions

1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to open the oven door and remove the screws securing the main top.
3
Once the screws are removed, close the oven door and lift the main top up.
4
Use a sturdy object to support it.
5
Release the burner by removing the screws securing the cross brace to the main top.
6
The burner is held in place by two brackets.
7
Note which slots in the base the bracket tabs are inserted into.
8
Now, use pliers to squeeze the bracket tabs to detach the old burner from the brace.
9
Install the new burner by first transferring the brackets from the old component to the new one.
10
Be sure to align the brackets with the correct numbered hole.
11
Now, transfer the wires from the old burner to the new one.
12
Alight the bracket tabs with the appropriate slots and snap the new burner into the cross brace.
13
Position the assembly against the main top and secure with the screws.
14
Remove the support and lower the main top.
15
Secure the main top by reinstalling the screws.
16
You’re now ready to plug the appliance back in to make sure it’s functioning properly.
Description
This video provides step-by-step instructions for replacing the small surface element burner (rear) on Frigidaire electric ranges. The most common reasons for replacing the burner is when the surface element won’t work or won’t turn off.

All of the information in this burner replacement video is applicable to the following brands: Frigidaire, Kenmore, Crosley, Electrolux, Westinghouse, Kelvinator, Tappan, Gibson

Tools used: Phillips head screwdriver, 14” nut driver
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to open the oven door and remove the screws securing the main top.
3
Once the screws are removed, close the oven door and lift the main top up.
4
Use a sturdy object to support it.
5
Release the burner by removing the screws securing the cross brace to the main top.
6
The burner is held in place by two brackets.
7
Note which slots in the base the bracket tabs are inserted into.
8
Now, use pliers to squeeze the bracket tabs to detach the old burner from the brace.
9
Install the new burner by first transferring the brackets from the old component to the new one.
10
Be sure to align the brackets with the correct numbered hole.
11
Now, transfer the wires from the old burner to the new one.
12
Alight the bracket tabs with the appropriate slots and snap the new burner into the cross brace.
13
Position the assembly against the main top and secure with the screws.
14
Remove the support and lower the main top.
15
Secure the main top by reinstalling the screws.
16
You’re now ready to plug the appliance back in to make sure it’s functioning properly.

Applicable Product Model

Parts Needed
Recommended Tools and Accessories
Total$0.00

Related Articles & Videos

03:59
462
5
Part Replacement
Frigidaire Electric Range 6-Inch Surface Element Replacement (318178110)
View Solution
06:03
8.6k
22
Part Replacement
Frigidaire Electric Stove Replace Surface Element, Small #318178110
View Solution
00:00
0
0
Disassembly
Frigidaire Electric Range Disassembly FEF366EME
View Solution
00:00
0
0
Part Testing
Burner Not Working? Radiant Element Testing – Electric Stove Repair
View Solution