Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Mantis Tiller Handle Replacement #400315

01:47
905
0
This video provides step-by-step instructions for replacing the handle on Mantis tillers. The most common reason for replacing the handle is if it is misplaced or broken.

All of the information in this handle replacement video is applicable to the following brands: Mantis

Tools used: none

Step By Step Instructions

1
Before you replace the carry handle on your tiller make sure the engine has cooled and the on-off switch is in the “off” position.
2
We recommend performing this procedure with little or no fuel in the tank.
3
Now tip the tiller forward so it rests on the fuel tank and tine guard.
4
Unthread the handle adjustment knobs.
5
Remove the bolts to release the upper handle assembly.
6
Detach the throttle cable retaining clip.
7
You can now squeeze the lower arms together and pull off the old carry handle.
8
Install the new carry handle by sliding it onto the lower arms with the handle facing the engine.
9
Reattach the upper handle assembly using the bolts and adjustment knobs.
10
Secure the throttle cable with the retaining clip and return the tiller to its upright position.
Description
This video provides step-by-step instructions for replacing the handle on Mantis tillers. The most common reason for replacing the handle is if it is misplaced or broken.

All of the information in this handle replacement video is applicable to the following brands: Mantis

Tools used: none
Step-By-Step Instructions
1
Before you replace the carry handle on your tiller make sure the engine has cooled and the on-off switch is in the “off” position.
2
We recommend performing this procedure with little or no fuel in the tank.
3
Now tip the tiller forward so it rests on the fuel tank and tine guard.
4
Unthread the handle adjustment knobs.
5
Remove the bolts to release the upper handle assembly.
6
Detach the throttle cable retaining clip.
7
You can now squeeze the lower arms together and pull off the old carry handle.
8
Install the new carry handle by sliding it onto the lower arms with the handle facing the engine.
9
Reattach the upper handle assembly using the bolts and adjustment knobs.
10
Secure the throttle cable with the retaining clip and return the tiller to its upright position.

Applicable Product Model

Parts Needed
Handle
Handle
$9.61
Total$0.00

Related Articles & Videos