Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Frigidaire Gas Oven Won't Heat? Igniter Replacement #316489400

02:33
338k
731
This video provides step-by-step instructions for replacing the bake igniter on Frigidaire gas range. The most common reasons for replacing the bake igniter are temperature problems and/or the oven doesn’t bake evenly or won’t turn on.

All of the information for this burner replacement video is applicable to the following brands: Kenmore, Frigidaire, Crosley, Tappan, Westinghouse, Electrolux
Tools needed: flat head screwdriver, 14” nut driver

Step By Step Instructions

1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the racks from inside the oven.
3
Next, flip the hinge locks down on either side of the oven door.
4
Now lift the door up and out.
5
Remove the screws securing the oven’s bottom panel and lift the panel out.
6
Remove the screws and detach the burner shield.
7
Unscrew the mounting screws to release the old igniter.
8
Your next step is to disconnect the wire.
9
Be aware that you may need to remove the appliance’s back panel or the storage drawer to access the wire connector.
10
With the wire disconnected remove the old igniter.
11
Install the new igniter
12
By first reconnecting the wire then carefully mount the igniter to the burner tube using the screws.
13
Be careful not to touch the element itself.
14
Replace the burner shield and screws.
15
Replace the bottom panel and secure the screws.
16
If necessary, replace the back panel or storage drawer.
17
Reinstall the oven door by aligning the hinge hooks with the holes in the cabinet and push the hinge locks back into place
18
Replace the oven racks and plug the appliance back in to make sure it’s functioning properly.
Description
This video provides step-by-step instructions for replacing the bake igniter on Frigidaire gas range. The most common reasons for replacing the bake igniter are temperature problems and/or the oven doesn’t bake evenly or won’t turn on.

All of the information for this burner replacement video is applicable to the following brands: Kenmore, Frigidaire, Crosley, Tappan, Westinghouse, Electrolux
Tools needed: flat head screwdriver, 14” nut driver
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the racks from inside the oven.
3
Next, flip the hinge locks down on either side of the oven door.
4
Now lift the door up and out.
5
Remove the screws securing the oven’s bottom panel and lift the panel out.
6
Remove the screws and detach the burner shield.
7
Unscrew the mounting screws to release the old igniter.
8
Your next step is to disconnect the wire.
9
Be aware that you may need to remove the appliance’s back panel or the storage drawer to access the wire connector.
10
With the wire disconnected remove the old igniter.
11
Install the new igniter
12
By first reconnecting the wire then carefully mount the igniter to the burner tube using the screws.
13
Be careful not to touch the element itself.
14
Replace the burner shield and screws.
15
Replace the bottom panel and secure the screws.
16
If necessary, replace the back panel or storage drawer.
17
Reinstall the oven door by aligning the hinge hooks with the holes in the cabinet and push the hinge locks back into place
18
Replace the oven racks and plug the appliance back in to make sure it’s functioning properly.

Applicable Product Model

Parts Needed
Igniter
Igniter
$160.69
Recommended Tools and Accessories
Total$0.00

Related Articles & Videos