Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Mantis Tiller Transmission Drive Shaft Replacement #468

01:32
8.2k
17
This video provides step-by-step repair instructions for replacing the transmission drive shaft on a Honda small engine. The most common reason for replacing the drive shaft is when making another repair to the engine.

Click here to purchase part #468:
www.repairclinic.com/PartDetail/Drive-Shaft/468/1926544?TLSID=1876

All of the information for this transmission drive shaft replacement video is applicable to the following brands:
Mantis

Tools needed: 5/16th inch socket

Step By Step Instructions

1
Before you replace the transmission drive shaft on your tiller make sure the engine has cooled and the on-off switch is in the “off” position.
2
Now use a 5/16th inch socket to loosen the flange bolt securing the engine assembly to the transmission housing.
3
Detach the throttle cable retaining clip lift off the engine assembly and set it aside.
4
You can now remove the old drive shaft.
5
Install the new drive shaft by fully seating it in the transmission housing.
6
Reposition the engine assembly making sure there is no gap between the flange and the transmission housing.
7
Tighten the flange bolt to secure.
8
Secure the throttle cable with the retaining clip and the repair will be complete.
Description
This video provides step-by-step repair instructions for replacing the transmission drive shaft on a Honda small engine. The most common reason for replacing the drive shaft is when making another repair to the engine.

Click here to purchase part #468:
www.repairclinic.com/PartDetail/Drive-Shaft/468/1926544?TLSID=1876

All of the information for this transmission drive shaft replacement video is applicable to the following brands:
Mantis

Tools needed: 5/16th inch socket
Step-By-Step Instructions
1
Before you replace the transmission drive shaft on your tiller make sure the engine has cooled and the on-off switch is in the “off” position.
2
Now use a 5/16th inch socket to loosen the flange bolt securing the engine assembly to the transmission housing.
3
Detach the throttle cable retaining clip lift off the engine assembly and set it aside.
4
You can now remove the old drive shaft.
5
Install the new drive shaft by fully seating it in the transmission housing.
6
Reposition the engine assembly making sure there is no gap between the flange and the transmission housing.
7
Tighten the flange bolt to secure.
8
Secure the throttle cable with the retaining clip and the repair will be complete.

Applicable Product Model

Parts Needed
Total$0.00

Related Articles & Videos