Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Echo Leaf Blower Fuel Supply Line Replacement #13201204631

02:27
42k
95
This video provides step-by-step instructions for replacing the fuel supply line on Echo leaf blowers. The most common reason for replacing the line is when it is worn or damaged in any way.

All of the information in this fuel line replacement video is applicable to the following brands: Echo

Tools used: large flat-head screwdriver

Step By Step Instructions

1
Before you replace the fuel supply line in your leaf blower make sure the engine has cooled and the on-off switch is in the “off” position.
2
We recommend performing this procedure with little or no fuel in the tank.
3
Note the orientation of the fuel lines attached to the carburetor then detach them.
4
If necessary, pull the vent line free.
5
Now use a large flat-head screwdriver to help pry the grommet out of the fuel tank and pull the fuel line assembly free.
6
Remove the filter fuel line fitting from the fuel supply line and pull the old supply line from the grommet.
7
Install the new fuel supply line by inserting it through the grommet.
8
Insert the filter fuel line fitting into the supply line and push the assembly into the grommet.
9
Now insert the fuel filter and line into the tank.
10
Note the orientation of the fuel lines then press the grommet into place.
11
Attach the fuel lines to the appropriate ports on the carburetor.
12
Position the vent line in the blower housing.
13
With the repair complete turn the on-off switch to the “on” position, refill the fuel tank and your leaf blower should be ready for use.
Description
This video provides step-by-step instructions for replacing the fuel supply line on Echo leaf blowers. The most common reason for replacing the line is when it is worn or damaged in any way.

All of the information in this fuel line replacement video is applicable to the following brands: Echo

Tools used: large flat-head screwdriver
Step-By-Step Instructions
1
Before you replace the fuel supply line in your leaf blower make sure the engine has cooled and the on-off switch is in the “off” position.
2
We recommend performing this procedure with little or no fuel in the tank.
3
Note the orientation of the fuel lines attached to the carburetor then detach them.
4
If necessary, pull the vent line free.
5
Now use a large flat-head screwdriver to help pry the grommet out of the fuel tank and pull the fuel line assembly free.
6
Remove the filter fuel line fitting from the fuel supply line and pull the old supply line from the grommet.
7
Install the new fuel supply line by inserting it through the grommet.
8
Insert the filter fuel line fitting into the supply line and push the assembly into the grommet.
9
Now insert the fuel filter and line into the tank.
10
Note the orientation of the fuel lines then press the grommet into place.
11
Attach the fuel lines to the appropriate ports on the carburetor.
12
Position the vent line in the blower housing.
13
With the repair complete turn the on-off switch to the “on” position, refill the fuel tank and your leaf blower should be ready for use.
Parts Needed
Recommended Tools and Accessories
Fuel Tank
Fuel Tank
$29.18
Fuel Tank
Fuel Tank
$46.58
Total$0.00

Related Articles & Videos