Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Echo Leaf Blower Fuel Return Line Replacement #13201049730

02:34
5.7k
4
This video provides step-by-step repair instructions for replacing the fuel return line on an Echo leaf blower. The most common reason for replacing the fuel line is when it is leaking.

All of the information for this fuel return line replacement video is applicable to the following brands:
Echo, Shindaiwa

Tools needed: large flat-head screwdriver

Step By Step Instructions

1
Before you replace the fuel return line in your leaf blower make sure the engine has cooled and the on-off switch is in the “off” position.
2
We recommend performing this procedure with little or no fuel in the tank.
3
Note the orientation of the fuel lines attached to the carburetor then detach them.
4
If necessary, pull the vent line free.
5
Now use a large flat-head screwdriver to help pry the grommet out of the fuel tank and pull the fuel line assembly free.
6
If still intact, remove the old return line from the grommet.
7
To make it easier to install the new fuel return line apply a small amount of liquid dish soap or rinse aid.
8
Then insert the line through the grommet.
9
Now insert the fuel filter and line into the tank.
10
Note the orientation of the fuel lines then press the grommet into place.
11
Attach the fuel lines to the appropriate ports on the carburetor.
12
Position the vent line in the blower housing.
13
With the repair complete turn the on-off switch to the “on” position, refill the fuel tank and your leaf blower should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the fuel return line on an Echo leaf blower. The most common reason for replacing the fuel line is when it is leaking.

All of the information for this fuel return line replacement video is applicable to the following brands:
Echo, Shindaiwa

Tools needed: large flat-head screwdriver
Step-By-Step Instructions
1
Before you replace the fuel return line in your leaf blower make sure the engine has cooled and the on-off switch is in the “off” position.
2
We recommend performing this procedure with little or no fuel in the tank.
3
Note the orientation of the fuel lines attached to the carburetor then detach them.
4
If necessary, pull the vent line free.
5
Now use a large flat-head screwdriver to help pry the grommet out of the fuel tank and pull the fuel line assembly free.
6
If still intact, remove the old return line from the grommet.
7
To make it easier to install the new fuel return line apply a small amount of liquid dish soap or rinse aid.
8
Then insert the line through the grommet.
9
Now insert the fuel filter and line into the tank.
10
Note the orientation of the fuel lines then press the grommet into place.
11
Attach the fuel lines to the appropriate ports on the carburetor.
12
Position the vent line in the blower housing.
13
With the repair complete turn the on-off switch to the “on” position, refill the fuel tank and your leaf blower should be ready for use.
Parts Needed
Recommended Tools and Accessories
Fuel Tank
Fuel Tank
$29.18
Fuel Tank
Fuel Tank
$46.58
Total$0.00

Related Articles & Videos