Orders placed by 8:00 p.m. ET Monday through Friday will ship the same day.

Echo Leaf Blower Intake Manifold Gasket Replacement V103000400

01:43
2.6k
3
This video provides step-by-step instructions for replacing the intake manifold gasket on Echo leaf blowers. The most common reason for replacing the gasket is when the engine runs poorly.

All of the information in this gasket replacement video is applicable to the following brands: Echo

Tools used: T25 Torx bit screwdriver

Step By Step Instructions

1
Before you replace the intake manifold gasket on your leaf blower make sure the engine has cooled and the on-off switch is in the “off” position.
2
Now loosen the mounting screw to release the air filter cover and pull out the air filter.
3
Use a t-25 torx bit screwdriver to unthread the carburetor mounting bolts.
4
Separate the air filter housing and carburetor from the spacer and remove the old intake manifold gasket, if still intact.
5
Install the new intake manifold gasket by sliding it onto the carburetor mounting bolts.
6
Now thread the bolts into the carburetor spacer and tighten to secure the assembly.
7
Realign the air filter on the filter housing.
8
Reposition the cover and tighten the screw to secure.
Description
This video provides step-by-step instructions for replacing the intake manifold gasket on Echo leaf blowers. The most common reason for replacing the gasket is when the engine runs poorly.

All of the information in this gasket replacement video is applicable to the following brands: Echo

Tools used: T25 Torx bit screwdriver
Step-By-Step Instructions
1
Before you replace the intake manifold gasket on your leaf blower make sure the engine has cooled and the on-off switch is in the “off” position.
2
Now loosen the mounting screw to release the air filter cover and pull out the air filter.
3
Use a t-25 torx bit screwdriver to unthread the carburetor mounting bolts.
4
Separate the air filter housing and carburetor from the spacer and remove the old intake manifold gasket, if still intact.
5
Install the new intake manifold gasket by sliding it onto the carburetor mounting bolts.
6
Now thread the bolts into the carburetor spacer and tighten to secure the assembly.
7
Realign the air filter on the filter housing.
8
Reposition the cover and tighten the screw to secure.
Parts Needed
Recommended Tools and Accessories
Fuel Tank
Fuel Tank
$29.18
Fuel Tank
Fuel Tank
$46.58
Total$0.00

Related Articles & Videos

08:23
120k
341
Part Replacement
Echo Leaf Blower Ignition Coil Replacement #A411000500
View Solution
03:32
100k
178
Part Replacement
Echo Leaf Blower Starts Then Stops? Spark Arrestor #A310000070
View Solution
01:46
99k
120
Part Replacement
Echo Leaf Blower Won't Start? Recoil Starter #A051000960
View Solution
03:06
83k
113
Part Replacement
Echo Leaf Blower Running Roughly? Carburetor #RB-K106
View Solution