Orders placed by 8:00 p.m. ET Monday through Friday will ship the same day.

Echo Leaf Blower Blower Wheel Replacement #E100000070

04:29
3.6k
6
This video provides step-by-step instructions for replacing the blower wheel on Echo leaf blowers. The most common reason for replacing the blower wheel is when the leaf blower doesn’t blow with enough force.

All of the information in this blower wheel replacement video is applicable to the following brands: Echo

Tools used: 3/4” socket, T25 Torx bit screwdriver, 13mm socket

Step By Step Instructions

1
Before you replace the blower wheel on your leaf blower make sure the engine has cooled and the on-off switch is in the “off” position.
2
Remove the wire and boot from the spark plug.
3
Use a 3/4 inch socket or spark plug wrench to help loosen and remove the plug.
4
Now use a t-25 torx bit screwdriver to unthread the mounting screws securing the engine cover.
5
With the screws removed, carefully detach the cover.
6
Next, remove the blower tube if still intact.
7
Now unthread all of the screws securing the blower cover.
8
With the screws removed, pull off the cover.
9
Confirm that the piston is in the “down” position then insert a cord into the cylinder to prevent the piston from moving.
10
Secure the blower wheel and use a 13mm socket to loosen the blower wheel mounting bolt.
11
Unthread the bolt and remove the old blower wheel.
12
Install the new blower wheel by aligning it on the fan hub.
13
Confirm that the washer is in place on the mounting bolt then rethread the bolt and tighten to secure.
14
Remove the cord from the cylinder.
15
Make sure the blower tube lock is in place then reposition the blower housing
16
Thread and tighten all of the screws to secure.
17
Reinstall the blower tube.
18
Confirm that the throttle linkage is in place then realign the engine cover.
19
Replace the mounting screws to secure the cover.
20
Rethread the spark plug.
21
Be careful not to strip the threads by over-tightening.
22
Reattach the wire and boot to the plug.
23
With the new blower wheel installed turn the on-off switch to the “on” position and your leaf blower should be ready for use.
Description
This video provides step-by-step instructions for replacing the blower wheel on Echo leaf blowers. The most common reason for replacing the blower wheel is when the leaf blower doesn’t blow with enough force.

All of the information in this blower wheel replacement video is applicable to the following brands: Echo

Tools used: 3/4” socket, T25 Torx bit screwdriver, 13mm socket
Step-By-Step Instructions
1
Before you replace the blower wheel on your leaf blower make sure the engine has cooled and the on-off switch is in the “off” position.
2
Remove the wire and boot from the spark plug.
3
Use a 3/4 inch socket or spark plug wrench to help loosen and remove the plug.
4
Now use a t-25 torx bit screwdriver to unthread the mounting screws securing the engine cover.
5
With the screws removed, carefully detach the cover.
6
Next, remove the blower tube if still intact.
7
Now unthread all of the screws securing the blower cover.
8
With the screws removed, pull off the cover.
9
Confirm that the piston is in the “down” position then insert a cord into the cylinder to prevent the piston from moving.
10
Secure the blower wheel and use a 13mm socket to loosen the blower wheel mounting bolt.
11
Unthread the bolt and remove the old blower wheel.
12
Install the new blower wheel by aligning it on the fan hub.
13
Confirm that the washer is in place on the mounting bolt then rethread the bolt and tighten to secure.
14
Remove the cord from the cylinder.
15
Make sure the blower tube lock is in place then reposition the blower housing
16
Thread and tighten all of the screws to secure.
17
Reinstall the blower tube.
18
Confirm that the throttle linkage is in place then realign the engine cover.
19
Replace the mounting screws to secure the cover.
20
Rethread the spark plug.
21
Be careful not to strip the threads by over-tightening.
22
Reattach the wire and boot to the plug.
23
With the new blower wheel installed turn the on-off switch to the “on” position and your leaf blower should be ready for use.
Parts Needed
Recommended Tools and Accessories
Fuel Tank
Fuel Tank
$29.18
Fuel Tank
Fuel Tank
$46.58
Total$0.00

Related Articles & Videos

08:23
120k
341
Part Replacement
Echo Leaf Blower Ignition Coil Replacement #A411000500
View Solution
03:32
100k
178
Part Replacement
Echo Leaf Blower Starts Then Stops? Spark Arrestor #A310000070
View Solution
01:46
99k
120
Part Replacement
Echo Leaf Blower Won't Start? Recoil Starter #A051000960
View Solution
03:06
83k
113
Part Replacement
Echo Leaf Blower Running Roughly? Carburetor #RB-K106
View Solution