Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Echo Leaf Blower Fuel Line Kit Installation #90129

02:39
28k
44
This video provides step-by-step instructions for installing a fuel line kit (replacing the fuel tank grommet, fuel lines, fuel filter, vent line, and vent) on Echo and Shindaiwa leaf blowers. The most common reason for replacing any of these parts is when the leaf blower is leaking fuel and the part is worn.

All of the information in this fuel line kit installation video is applicable to the following brands: Echo, Shindaiwa

Tools used: large flat-head screwdriver, small flat-head screwdriver

Step By Step Instructions

1
Before you install the fuel line kit components in your leaf blower make sure the engine has cooled and the on-off switch is in the “off” position.
2
We recommend performing this procedure with little or no fuel in the tank.
3
Note the orientation of the fuel lines attached to the carburetor then detach them.
4
If necessary, pull the vent line free.
5
Now use a large flat-head screwdriver to help pry the grommet out of the fuel tank and pull the old fuel line assembly free.
6
Install the new fuel line assembly by inserting the fuel filter and line into the tank.
7
Note the orientation of the new fuel lines then press the grommet into place.
8
Attach the fuel lines to the appropriate ports on the carburetor.
9
Position the vent line in the blower housing.
10
Next, unthread the fuel tank cap and pull the retainer free.
11
Use a small flat-head screwdriver to help pry out the old cap gasket, if still intact and slide it off of the retainer.
12
Slide the new gasket over the retainer and press it into place in the cap.
13
Reinsert the retainer into the tank and thread on the cap.
Description
This video provides step-by-step instructions for installing a fuel line kit (replacing the fuel tank grommet, fuel lines, fuel filter, vent line, and vent) on Echo and Shindaiwa leaf blowers. The most common reason for replacing any of these parts is when the leaf blower is leaking fuel and the part is worn.

All of the information in this fuel line kit installation video is applicable to the following brands: Echo, Shindaiwa

Tools used: large flat-head screwdriver, small flat-head screwdriver
Step-By-Step Instructions
1
Before you install the fuel line kit components in your leaf blower make sure the engine has cooled and the on-off switch is in the “off” position.
2
We recommend performing this procedure with little or no fuel in the tank.
3
Note the orientation of the fuel lines attached to the carburetor then detach them.
4
If necessary, pull the vent line free.
5
Now use a large flat-head screwdriver to help pry the grommet out of the fuel tank and pull the old fuel line assembly free.
6
Install the new fuel line assembly by inserting the fuel filter and line into the tank.
7
Note the orientation of the new fuel lines then press the grommet into place.
8
Attach the fuel lines to the appropriate ports on the carburetor.
9
Position the vent line in the blower housing.
10
Next, unthread the fuel tank cap and pull the retainer free.
11
Use a small flat-head screwdriver to help pry out the old cap gasket, if still intact and slide it off of the retainer.
12
Slide the new gasket over the retainer and press it into place in the cap.
13
Reinsert the retainer into the tank and thread on the cap.
Parts Needed
Fuel Line
Fuel Line
$22.01
Total$0.00

Related Articles & Videos