DescriptionThis video provides step-by-step repair instructions for replacing the oven sensor on a Kenmore gas range. The most common reasons for replacing the oven sensor is when the oven isn't baking evenly.
All of the information for this oven sensor replacement video is applicable to the following brands:
Whirlpool, Kenmore, Roper, Estate, Crosley
Tools needed: Phillips screwdriver
Step-By-Step Instructions1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the oven’s back panel.
3
Next, remove the mounting screws to release the old sensor.
4
Detach the wire connector and pull out the old sensor.
5
Install the new oven sensor by inserting it into the oven cavity.
6
Reconnect the wire then secure the mounting screws.
7
Replace the back panel and plug the appliance back in to make sure it’s functioning properly.