DescriptionThis video provides step-by-step repair instructions for replacing the drawer handle on a Whirlpool refrigerator. The most common reasons for replacing the drawer handle are when it is missing or broken.
All of the information for this refrigerator drawer handle support replacement video is applicable to the following brands:
Whirlpool
Tools needed: 1/8th inch Allen wrench
Step-By-Step Instructions1
Before you replace a drawer handle on your refrigerator consider using painters’ tape to help protect the stainless steel surface.
2
Use a 1/8th inch Allen wrench to unthread the set screws securing the old handle if still intact.
4
Install the new drawer handle by aligning it on the mounting posts.
5
Then tighten the set screws to secure.