Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Whirlpool Microwave Replace Turntable Motor Seal #8184109

02:40
2.1k
4
This video provides step-by-step instructions for replacing the turntable motor seal on Whirlpool microwaves. The most common reason for replacing the seal is if it is damaged, or along with the motor.

All of the information in this seal replacement video is applicable to the following brands: Whirlpool, KitchenAid, Kenmore, Amana, Maytag, Ikea, Estate, Jenn Air

Tools used: Phillips head screwdriver, T20 Torx bit screwdriver

Step By Step Instructions

1
Before you replace the turntable motor seal in your microwave oven first unplug the power cord.
2
Now release the bottom panel by using a phillips-head screwdriver to unthread the mounting screws.
3
Note the orientation of the turntable motor wires then slide off the insulators and depress the locking tabs to disconnect the wires.
4
Use a t-20 torx bit screwdriver to unthread the turntable motor mounting screws.
5
Remove the motor.
6
If still intact, remove the old seal.
7
Install the new turntable motor seal by sliding it onto the motor shaft.
8
Now align the motor shaft in the drive coupling and reposition the motor on the base.
9
Thread the mounting screws to secure.
10
Connect the wires to the appropriate terminals and slide the insulators over the terminals.
11
Lift up the bottom panel and secure it with the screws.
12
With the repair completed, plug the power cord back in and your microwave oven should be ready for use.
Description
This video provides step-by-step instructions for replacing the turntable motor seal on Whirlpool microwaves. The most common reason for replacing the seal is if it is damaged, or along with the motor.

All of the information in this seal replacement video is applicable to the following brands: Whirlpool, KitchenAid, Kenmore, Amana, Maytag, Ikea, Estate, Jenn Air

Tools used: Phillips head screwdriver, T20 Torx bit screwdriver
Step-By-Step Instructions
1
Before you replace the turntable motor seal in your microwave oven first unplug the power cord.
2
Now release the bottom panel by using a phillips-head screwdriver to unthread the mounting screws.
3
Note the orientation of the turntable motor wires then slide off the insulators and depress the locking tabs to disconnect the wires.
4
Use a t-20 torx bit screwdriver to unthread the turntable motor mounting screws.
5
Remove the motor.
6
If still intact, remove the old seal.
7
Install the new turntable motor seal by sliding it onto the motor shaft.
8
Now align the motor shaft in the drive coupling and reposition the motor on the base.
9
Thread the mounting screws to secure.
10
Connect the wires to the appropriate terminals and slide the insulators over the terminals.
11
Lift up the bottom panel and secure it with the screws.
12
With the repair completed, plug the power cord back in and your microwave oven should be ready for use.

Applicable Product Model

Microwave
Brand
Product Type
Model
Subtype
Product Diagram & Manuals
Parts Needed
Seal
Seal
$9.01
Recommended Tools and Accessories
Cleaner
Cleaner
$8.99
Cleaner
Cleaner
$20.66
Cleaner
Cleaner
$14.18
Cleaner
Cleaner
$22.37
Total$0.00

Related Articles & Videos