Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Craftsman Snowblower Bail Arm Replacement #747-05327C-0637

00:55
752
0
This video provides step-by-step instructions for replacing the bail arm on Craftsman snowblowers. The most common reason for replacing the bail arm is if it is bent or broken, causing the augers to not engage.

All of the information in this bail arm replacement video is applicable to the following brands: MTD, Craftsman, Yard Machines, Yard-Man, Cub Cadet, Troy-Bilt, Huskee

Tools used: none

Step By Step Instructions

1
Before you install a new bail arm on your snow blower make sure the ignition key has been removed.
2
Unhook the auger drive cable from the arm.
3
Now squeeze the old bail arm to remove it from the handle.
4
Install the new bail arm by inserting it into the handle then attach the auger drive cable.
5
With the repair completed reinsert the ignition key and your snow blower should be ready for use.
Description
This video provides step-by-step instructions for replacing the bail arm on Craftsman snowblowers. The most common reason for replacing the bail arm is if it is bent or broken, causing the augers to not engage.

All of the information in this bail arm replacement video is applicable to the following brands: MTD, Craftsman, Yard Machines, Yard-Man, Cub Cadet, Troy-Bilt, Huskee

Tools used: none
Step-By-Step Instructions
1
Before you install a new bail arm on your snow blower make sure the ignition key has been removed.
2
Unhook the auger drive cable from the arm.
3
Now squeeze the old bail arm to remove it from the handle.
4
Install the new bail arm by inserting it into the handle then attach the auger drive cable.
5
With the repair completed reinsert the ignition key and your snow blower should be ready for use.

Applicable Product Model

Snowblower
Brand
Product Type
Model
Subtype
Product Diagram & Manuals
Parts Needed
Total$0.00

Related Articles & Videos