Orders placed by 8:00 p.m. ET Monday through Friday will ship the same day.

LG Gas Range Oven Relay Board Replacement #EBR52349703

02:55
9.1k
16
This video provides step-by-step repair instructions for replacing the oven relay board an LG gas range. The most common reasons for replacing the relay board are when the oven won’t heat, won’t turn off, or won’t turn on.

All of the information for this oven relay board replacement video is applicable to the following brands:
LG

Tools needed: Phillips head screwdriver

Step By Step Instructions

1
As with any appliance repair, you should unplug the power cord before beginning.
2
To replace the relay board in your range first use a phillips-head screwdriver to unthread the screws securing the upper rear access panel brackets.
3
Carefully remove the brackets.
4
Next, remove the screws securing the panel itself.
5
Lift the panel up and out to detach.
6
Note the orientation of the wires attached to the relay board and disconnect them.
7
Now unthread the screws securing the board.
8
With the screws removed, release the retaining clips to fully detach the old board.
9
Install the new relay board by aligning it in the control assembly and snapping it into place.
10
Thread the screws to secure.
11
Connect wires to the appropriate terminals on the new board.
12
Replace the upper access panel and secure it with the screws.
13
Now replace the brackets and rethread the screws to secure.
14
With the repair completed plug the power cord back in and your range should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the oven relay board an LG gas range. The most common reasons for replacing the relay board are when the oven won’t heat, won’t turn off, or won’t turn on.

All of the information for this oven relay board replacement video is applicable to the following brands:
LG

Tools needed: Phillips head screwdriver
Step-By-Step Instructions
1
As with any appliance repair, you should unplug the power cord before beginning.
2
To replace the relay board in your range first use a phillips-head screwdriver to unthread the screws securing the upper rear access panel brackets.
3
Carefully remove the brackets.
4
Next, remove the screws securing the panel itself.
5
Lift the panel up and out to detach.
6
Note the orientation of the wires attached to the relay board and disconnect them.
7
Now unthread the screws securing the board.
8
With the screws removed, release the retaining clips to fully detach the old board.
9
Install the new relay board by aligning it in the control assembly and snapping it into place.
10
Thread the screws to secure.
11
Connect wires to the appropriate terminals on the new board.
12
Replace the upper access panel and secure it with the screws.
13
Now replace the brackets and rethread the screws to secure.
14
With the repair completed plug the power cord back in and your range should be ready for use.

Applicable Product Model

Parts Needed
Recommended Tools and Accessories
Total$0.00

Related Articles & Videos

03:48
64k
251
Part Replacement
LG Gas Range Oven Igniter Replacement #MEE61841401
View Solution
03:58
78k
217
Part Replacement
LG Gas Stove Spark Electrode Replacement, Center #EAD60700502
View Solution
04:41
65k
149
Part Replacement
LG Gas Range/Oven Control Panel Replacement #AGM73590311
View Solution
05:28
19k
87
Part Replacement
LG Gas Stove Burner Valve Replacement, Left Front #MJX61842207
View Solution