Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

LG Gas Range Stove Burner Tube, Right Front #MGE61842801

03:49
723
2
This video provides step-by-step repair instructions for replacing the right front burner tube on an LG gas range. The most common reasons for replacing the burner tube are when the burner won’t produce a spark or when the burner tube is leaking gas.

All of the information for this right front burner tube replacement video is applicable to the following brands:
LG

Tools needed: Phillips head screwdriver, ½ inch wrench, putty knife

Step By Step Instructions

1
Before replace the right front burner tube in your range first unplug the power cord
2
Shut off the gas supply.
3
Now lift off the three grates.
4
Next, remove all of the burner caps and the burner bases.
5
Use a phillips-head screwdriver to unthread the fifteen screws securing the main top to the orifice holders.
6
Now insert a putty knife under the main top to release the retaining clips.
7
You can now fully remove the main top.
8
Use a half-inch wrench to unthread the nuts securing the burner tube to the burner valve and the orifice holder.
9
Remove the old tube.
10
Install the new burner tube by inserting the tube into the orifice holder and tighten the nut.
11
Insert the opposite end into the burner valve and secure the nut.
12
Reposition and lower the main top.
13
Making sure the orifice holders and spark electrodes protrude through the openings, snap the main top into place.
14
Rethread the screws to secure the orifice holders to the main top.
15
Replace the burner bases making sure the spark electrodes align with the holes.
16
Position the burner caps.
17
Replace the burner grates plug the power cord back in turn the gas supply back on and your range should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the right front burner tube on an LG gas range. The most common reasons for replacing the burner tube are when the burner won’t produce a spark or when the burner tube is leaking gas.

All of the information for this right front burner tube replacement video is applicable to the following brands:
LG

Tools needed: Phillips head screwdriver, ½ inch wrench, putty knife
Step-By-Step Instructions
1
Before replace the right front burner tube in your range first unplug the power cord
2
Shut off the gas supply.
3
Now lift off the three grates.
4
Next, remove all of the burner caps and the burner bases.
5
Use a phillips-head screwdriver to unthread the fifteen screws securing the main top to the orifice holders.
6
Now insert a putty knife under the main top to release the retaining clips.
7
You can now fully remove the main top.
8
Use a half-inch wrench to unthread the nuts securing the burner tube to the burner valve and the orifice holder.
9
Remove the old tube.
10
Install the new burner tube by inserting the tube into the orifice holder and tighten the nut.
11
Insert the opposite end into the burner valve and secure the nut.
12
Reposition and lower the main top.
13
Making sure the orifice holders and spark electrodes protrude through the openings, snap the main top into place.
14
Rethread the screws to secure the orifice holders to the main top.
15
Replace the burner bases making sure the spark electrodes align with the holes.
16
Position the burner caps.
17
Replace the burner grates plug the power cord back in turn the gas supply back on and your range should be ready for use.

Applicable Product Model

Parts Needed
Recommended Tools and Accessories
Total$0.00

Related Articles & Videos